*Inj. molded plastic* Upcoming Ship Kit Releases

Main forum for general questions

Moderators: MartinJQuinn, JIM BAUMANN, Timmy C, Gernot

Post Reply
User avatar
pascalemod
Posts: 2011
Joined: Sat Jul 30, 2016 5:33 pm
Location: Stockholm, Sweden

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by pascalemod »

drasticplastic wrote:
pascalemod wrote:
What are the visible differences to the 12-41 version - the radar, and the UP launchers? anything else, like some configuration they change in boats or cranes positioning or smth?

I wouldn't mind knowing that, too. I have the first PoW release and would rather build it as Denmark Straight version (much easier camo job! :big_grin: ) , and not buy a second one. Also, would the same AM wood deck be applicable to both versions?
:wave_1:
Unless they moved ventilators and boats, I think the deck fits fine. On this forum earlier when I asked everyone told me the only difference on PoW between May and Dec was the addition of the radar inside of the lantern on top, and the removal of UP launcherrs and install of the AA guns. So, I really cant tell, but I hope thats it. Im like you, bought the 12-41 to convert to 5-41 but now that this is out Im kinda hoping the changes are very small.
- @Shipific on IG
my gallery
User avatar
ch hoeltge
Posts: 359
Joined: Thu Dec 31, 2015 2:54 am
Location: Bad Krozingen/Germany
Contact:

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by ch hoeltge »

drasticplastic wrote:
pascalemod wrote:
What are the visible differences to the 12-41 version - the radar, and the UP launchers? anything else, like some configuration they change in boats or cranes positioning or smth?

I wouldn't mind knowing that, too. I have the first PoW release and would rather build it as Denmark Straight version (much easier camo job! :big_grin: ) , and not buy a second one. Also, would the same AM wood deck be applicable to both versions?
:wave_1:
I think I will make this also, as there is still unclear about the correct colors for PoW in 8/41 and 12/41.
Regarding the wooddeck, if it has cutouts for the rear AA guns, than it won't fit, as they wheren't on the 5/41 PoW.
When the instructions are online then you can see the changes needed :big_grin:

Greetings Christian
At work:

1/700 IJN Yahagi
Hans exter

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Hans exter »

Yeah!

1:350 exter on the update page from trumpeter!

Kind regards,

Henk
drasticplastic
Posts: 1439
Joined: Sun Aug 20, 2017 9:46 am
Location: Montreal, Canada

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by drasticplastic »

ch hoeltge wrote:
I think I will make this also, as there is still unclear about the correct colors for PoW in 8/41 and 12/41.
Regarding the wooddeck, if it has cutouts for the rear AA guns, than it won't fit, as they wheren't on the 5/41 PoW.
When the instructions are online then you can see the changes needed :big_grin:

Greetings Christian
I was just examining Flyhawk's PoW (12/41) and Wood Hunter's deck for same. Flyhawk has the three extra stern guntubs, but you have to open some unfinished deck holes to mount them (as Tamiya does on some kits). Wood Hunter's deck has no corresponding openings or holes for the gun tubs. So, apparently, both kit, and wood deck can be used interchangeably for either version.
:wave_1:
User avatar
Miguel
Posts: 1562
Joined: Wed Feb 09, 2005 5:45 pm
Location: Abu Dhabi

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Miguel »

Hans exter wrote:Yeah!

1:350 exter on the update page from trumpeter!

Kind regards,

Henk





:woo_hoo: :woo_hoo: :woo_hoo: :woo_hoo:

FINALLY!!!!!!!!!!!!!!!!!!!!!

1/350 TRUMPETER EXETER

Image

Now is just few weeks to be available for sale :woo_hoo: :woo_hoo: :woo_hoo: :woo_hoo:
No Whine Policy
1.- Modify it
2.- Ignore it
3.- Don't build it
Guest

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Guest »

Pole masts = up to 1939 = River Plate ?
rotley
Posts: 235
Joined: Sat Feb 23, 2013 7:18 pm
Location: Sydney, Australia

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by rotley »

Hans exter wrote:Yeah!

1:350 exter on the update page from trumpeter!

Kind regards,

Henk

:jump_1: :jump_1:
User avatar
73north
Posts: 149
Joined: Tue Feb 14, 2017 5:10 am
Location: Scottish Borders , Scotland

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by 73north »

This is the Chinese link to the announcement ( the actual Trumpeter website is still playing up )
http://www.trumpeter-china.com/index.ph ... d=135&l=en

It looks like it will be 1939 and the specific Battle of River Plate version that gets released !
User avatar
dagovee
Posts: 46
Joined: Fri Apr 08, 2016 6:11 pm
Location: Dalton, Georgia

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by dagovee »

Oh my, this will pair up nicely with my Spee!!!
Eric
User avatar
pascalemod
Posts: 2011
Joined: Sat Jul 30, 2016 5:33 pm
Location: Stockholm, Sweden

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by pascalemod »

73north wrote:This is the Chinese link to the announcement ( the actual Trumpeter website is still playing up )
http://www.trumpeter-china.com/index.ph ... d=135&l=en

It looks like it will be 1939 and the specific Battle of River Plate version that gets released !
lets hope one day a full hull 1/700... nah, theyll do the WL version only I bet.
- @Shipific on IG
my gallery
User avatar
Admiral John Byng
Posts: 2834
Joined: Fri Nov 07, 2008 3:35 pm
Location: UK

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Admiral John Byng »

Walrus in 1/200 scale does that mean PoW in that scale coming from Trumpeter?
In 1757 Admiral John Byng was shot "pour encourager les autres". Voltaire
User avatar
Timmy C
Posts: 12453
Joined: Mon Jan 10, 2005 6:00 pm
Location: Ottawa, Canada

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Timmy C »

No, just that they're selling the one from their 1/200 Rodney separately.
De quoi s'agit-il?
User avatar
Tim Jacobs
Posts: 413
Joined: Mon Jan 10, 2005 11:40 pm
Location: Peyton, Colorado

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Tim Jacobs »

Freetime listed several 1/350 submarines from AFV today under "new products." I don't see any of them in the first post in this thread. Are they re-pops?

German U-Boat Type VII B
German U-Boat Type VII C
German U-Boat Type VII D Minelayer
IJN I-19
IJN I-27
Gato class 1941
Gato class 1942
Gato class 1943
Guppy IB
On the workbench:
I Love Kit 1/72 OSA-I

Recently completed:
Das Werk 1/16 Panzer III Ausf. J (early)
Trumpeter 1/35 SA-8 Gecko
Trumpeter 1/350 Moskva (Slava-class)
User avatar
Timmy C
Posts: 12453
Joined: Mon Jan 10, 2005 6:00 pm
Location: Ottawa, Canada

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Timmy C »

Yeah, those have all been available for several years now - see the "Release Date" notation for this set of AFV 1/350 kits on Hobby Search, for instance: https://www.1999.co.jp/eng/search?typ1_ ... ub+1%2f350
De quoi s'agit-il?
User avatar
Admiral John Byng
Posts: 2834
Joined: Fri Nov 07, 2008 3:35 pm
Location: UK

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Admiral John Byng »

Timmy C wrote:No, just that they're selling the one from their 1/200 Rodney separately.
Ah, forgot about that. Thanks Timmy.
In 1757 Admiral John Byng was shot "pour encourager les autres". Voltaire
Plasma_Frigate
Posts: 59
Joined: Wed Mar 09, 2016 5:17 am

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Plasma_Frigate »

Miguel wrote:
Hans exter wrote:Yeah!

1:350 exter on the update page from trumpeter!

Kind regards,

Henk





:woo_hoo: :woo_hoo: :woo_hoo: :woo_hoo:

FINALLY!!!!!!!!!!!!!!!!!!!!!

1/350 TRUMPETER EXETER

Image

Now is just few weeks to be available for sale :woo_hoo: :woo_hoo: :woo_hoo: :woo_hoo:
Can anyone identify what the colourful markings are on top of the main turrets? Are they flag or ensign paintings similar to how Dunquerke and Strasbourg wore French flag colors over their turrets?
User avatar
Ady
Posts: 523
Joined: Tue Feb 15, 2011 4:16 pm

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Ady »

As far as I remember it was just EX for aerial recognition.
NVNC EST BIBENDVM
User avatar
Steve
Posts: 782
Joined: Wed Jun 27, 2007 11:59 am

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Steve »

HMS Dorsetshire 1/700 completed kit photos suggest the hull is "sagged."
maxim
Posts: 3988
Joined: Tue Jun 14, 2005 6:23 am
Location: Bonn

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by maxim »

The usually differs from each individual kit to another. Do not panic ;)
Image
User avatar
Quaestor
Posts: 1322
Joined: Fri Jun 07, 2013 11:41 am
Location: CT, US of A

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Quaestor »

Continuing to ring the changes on the Fubuki class destroyers, Yamashita is set to release Akebono in 1/700th.

https://www.1999.co.jp/eng/10549349
Harold
Post Reply

Return to “Main Forum”