The Ship Model Forum

The Ship Modelers Source
It is currently Fri Oct 18, 2019 10:03 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 216 posts ]  Go to page Previous  1 ... 7, 8, 9, 10, 11
Author Message
PostPosted: Mon Mar 04, 2019 12:01 pm 
Offline
User avatar

Joined: Mon Feb 21, 2011 6:38 am
Posts: 395
Location: Czech Republic
Thanks, G-Opt (and also to Mike C whom I am in touch with via email)! It is now clear that we are seing two different variants - the "old", foldable to the side, as above and the "new" one, roller-type, as seen e.g. on this USS Northampton photo.

Interestingly enough, the photos of bomb-damaged USS Chester (like this one) seem to show that she still had the old version (no roll-up seen, inner part of door folded).

Unfortunately for me, none of the 1941-42 photos of USS Chicago I´ve collected clearly show which version she had. The best of them is 19-N-39212 which seems to suggest she had the roll-up version at that time (modifications similar to Nothampton´s to the vent and structure between hangar doors can be barely seen while none of the vertical bracing seems to be there), but this is already after her major (and final) refit, so it does not say much about how she appeared in August 1942.

_________________
My Gallery | At works: 1/700 USS Chicago 8/1942 | 1/700 Kinugasa 8/1942 | Recently completed: 1/700 Yunagi 8/1942


Top
 Profile  
Reply with quote  
PostPosted: Mon Mar 04, 2019 4:50 pm 
Offline
User avatar

Joined: Wed Jan 12, 2005 6:14 am
Posts: 207
Location: SE Michigan
I think I was wrong earlier. Most Northampton's had the accordion style doors the whole time (at least until loss) Chester appears to have had her hanger doors changed during the war to a swinging type door from the accordion style.
Portland had a roll up type door to start and it was changed to accordion style during her damage repair after 11-13-42. Indy got the same door change in May 1943.
San Francisco also went from roll up to accordion style doors after 11-13-42 repairs.

_________________
Our CO prior to flying to the boomer: “Our goals on this patrol is to shoot missiles and torpedoes.”
Junior Nuke Officer (me) : “Captain, don’t we really want to be like Monty Python and ‘Not be seen’?”
CO “You seem to be missing the big picture”
“Oh”


Top
 Profile  
Reply with quote  
PostPosted: Mon Mar 04, 2019 9:16 pm 
Offline

Joined: Mon Jan 07, 2008 10:15 pm
Posts: 639
Vladi wrote:
Hello guys, I am looking for a photo of a Northampton class CA that would show closed hangar door (the well deck looking aft). Any ideas please?


Does this shot of Chester Sept. '43 help?
Image

Image


Top
 Profile  
Reply with quote  
PostPosted: Tue Mar 05, 2019 2:51 am 
Offline
User avatar

Joined: Mon Feb 21, 2011 6:38 am
Posts: 395
Location: Czech Republic
Thanks, Jeff! So correction to my previous conclusion - apparently Chester was an example of yet another variant... doors folded to the side without the heavy bracing.

_________________
My Gallery | At works: 1/700 USS Chicago 8/1942 | 1/700 Kinugasa 8/1942 | Recently completed: 1/700 Yunagi 8/1942


Top
 Profile  
Reply with quote  
PostPosted: Tue Mar 05, 2019 4:02 am 
Offline
User avatar

Joined: Wed Jan 12, 2005 1:32 am
Posts: 440
Location: Peach State
Vladi wrote:
Thanks, G-Opt (and also to Mike C whom I am in touch with via email)! It is now clear that we are seeing two different variants - the "old", foldable to the side, as above and the "new" one, roller-type, as seen e.g. on this USS Northampton photo.

I guess I wasn't clear in my reply to your message. The roller doors were replaced with folding doors during wartime refits. Less maintenance and less vulnerable to damage.

The Northampton photo in the link was taken in 1942 in a series for LIFE magazine. Other photos showed the red dots being painted over with white on the SOCs.


Top
 Profile  
Reply with quote  
PostPosted: Tue Mar 05, 2019 7:39 am 
Offline
User avatar

Joined: Mon Feb 21, 2011 6:38 am
Posts: 395
Location: Czech Republic
So three variants like this (pre-war to late)?


Attachments:
Northampton-class hangar door.JPG
Northampton-class hangar door.JPG [ 55.35 KiB | Viewed 709 times ]

_________________
My Gallery | At works: 1/700 USS Chicago 8/1942 | 1/700 Kinugasa 8/1942 | Recently completed: 1/700 Yunagi 8/1942
Top
 Profile  
Reply with quote  
PostPosted: Tue Mar 05, 2019 6:11 pm 
Offline

Joined: Mon Jan 07, 2008 10:15 pm
Posts: 639
Vladi,
This film from April 1, 1941 has camera crews on two ships. One is USS Arizona and the other is USS Louisville. There are a couple of scenes showing Louisville hanger doors.
https://www.youtube.com/watch?v=EMlSGtAFi-E&t=373s

Here is a still from the film.
Image


Top
 Profile  
Reply with quote  
PostPosted: Wed Mar 06, 2019 5:48 am 
Offline
User avatar

Joined: Mon Feb 21, 2011 6:38 am
Posts: 395
Location: Czech Republic
Thanks, Jeff, that is an excellent find. So Louisville had hangar door variant "B" at that time and she still had it on 11 November 1942 as seen at NH 94429.

_________________
My Gallery | At works: 1/700 USS Chicago 8/1942 | 1/700 Kinugasa 8/1942 | Recently completed: 1/700 Yunagi 8/1942


Top
 Profile  
Reply with quote  
PostPosted: Thu Mar 21, 2019 5:03 am 
Offline
User avatar

Joined: Mon Feb 21, 2011 6:38 am
Posts: 395
Location: Czech Republic
Hi folks, anybody has an idea how the non-skid stripes shown below looked like? I presume these were smaller rectangular sheets (rubber?) attached (glued?) side by side to the deck with their longer side perpendicular to the lenght of the ship. Is that right?


Attachments:
80-G-13455 crop.jpg
80-G-13455 crop.jpg [ 162.93 KiB | Viewed 519 times ]

_________________
My Gallery | At works: 1/700 USS Chicago 8/1942 | 1/700 Kinugasa 8/1942 | Recently completed: 1/700 Yunagi 8/1942
Top
 Profile  
Reply with quote  
PostPosted: Thu Mar 21, 2019 9:12 am 
Online
User avatar

Joined: Mon May 21, 2007 5:49 pm
Posts: 1226
Location: Troutdale, OR
Vladi,

These were a thin piece that was applied to the deck that had a rough texture, similar to items sold here in the US for boating and RV’s for the same purpose. The Northampton shows these off well.

Attachment:
File comment: Close up of the ones on the upper level of the forward superstructure
0C7CC824-5825-40A9-A1D0-7FF328A914CE.jpeg
0C7CC824-5825-40A9-A1D0-7FF328A914CE.jpeg [ 47.47 KiB | Viewed 505 times ]

Attachment:
3262542A-13E4-4878-AAD3-7A63CB8627BD.jpeg
3262542A-13E4-4878-AAD3-7A63CB8627BD.jpeg [ 189.39 KiB | Viewed 505 times ]

Attachment:
EF1085A9-6FB1-4478-9C81-EC608FBC0DBB.jpeg
EF1085A9-6FB1-4478-9C81-EC608FBC0DBB.jpeg [ 100.27 KiB | Viewed 505 times ]

Attachment:
File comment: Note the wheels for the Aircraft Crane tucked behind splinter shield both Port and Starboard
8A50DDD3-C144-4EE7-836F-32E0266A6A0B.jpeg
8A50DDD3-C144-4EE7-836F-32E0266A6A0B.jpeg [ 49.41 KiB | Viewed 505 times ]


Hope this helps,

Matt

_________________
In the yards right now:
1/350 USS Portland CA-33 1942
1/350 Trumpeter Texas with a twist


Top
 Profile  
Reply with quote  
PostPosted: Thu Mar 21, 2019 11:49 am 
Offline
User avatar

Joined: Mon Feb 21, 2011 6:38 am
Posts: 395
Location: Czech Republic
Hi Matt, thanks for pointing me to the Northampton photos! I don´t know why I keep forgetting to check the Life series...

_________________
My Gallery | At works: 1/700 USS Chicago 8/1942 | 1/700 Kinugasa 8/1942 | Recently completed: 1/700 Yunagi 8/1942


Top
 Profile  
Reply with quote  
PostPosted: Thu Mar 21, 2019 7:48 pm 
Offline
User avatar

Joined: Thu Jan 21, 2016 5:36 pm
Posts: 231
Vladi wrote:
Hi Matt, thanks for pointing me to the Northampton photos! I don´t know why I keep forgetting to check the Life series...


Life series? Is there a link? What resource am I overlooking? I see pics posted every once in a while with Life credits, what do I need to search for?


Top
 Profile  
Reply with quote  
PostPosted: Thu Mar 21, 2019 8:10 pm 
Offline
User avatar

Joined: Sun Mar 07, 2010 12:01 am
Posts: 1101
Location: Corvallis, Oregon, USA
Vladi,

When I was in the Navy (early 1970s) the non-skid strips were about 18" long (45.7 cm) by 6" wide 15.2 cm), with rounded corners, and adhesive backed - that is just an approximate size. They were flexible and had a sand coated surface. I think they came in rolls, attached to waxed paper strips to make it easy to get them off the paper. I don't know if they were produced this way during WWII, but they appear to have been the same size. Once something gets a Federal Stock Number (FSN) it never really disappears from the supply system.

We stuck them anywhere we needed good traction on decks, inclined ladder steps and wherever there was wear on the paint. For example, they might be placed on bulkheads where ladder rungs were positioned so the toes of our shoes wouldn't scuff the paint. That way we didn't have to repaint as often.

I don't know if there was any "correct" way to orient them. Most likely it was at the whim of the Division Chief Petty Officer. I have seen them arranged in concentric circles around 20mm and 40 mm gun mounts.

Another way to get a non-slip surface was to coat the deck with a mixture of sand and paint. The adhesive patches were simpler and faster with no clean up afterward.

Phil

_________________
A collision at sea will ruin your entire day. Aristotle


Top
 Profile  
Reply with quote  
PostPosted: Thu Mar 21, 2019 8:45 pm 
Offline

Joined: Mon Jan 07, 2008 10:15 pm
Posts: 639
Guba wrote:
Vladi wrote:
Hi Matt, thanks for pointing me to the Northampton photos! I don´t know why I keep forgetting to check the Life series...


Life series? Is there a link? What resource am I overlooking? I see pics posted every once in a while with Life credits, what do I need to search for?

Here is a link to all the pics.
http://images.google.com/hosted/life/06 ... 6323a.html

Cruiser Essay source:life


Top
 Profile  
Reply with quote  
PostPosted: Fri Mar 22, 2019 1:14 am 
Offline
User avatar

Joined: Mon Aug 06, 2007 6:29 pm
Posts: 1775
One word of caution on the Life photos. Many of them are backwards, like the third photo above (with the cap on the fore funnel visible).


Top
 Profile  
Reply with quote  
PostPosted: Fri Mar 22, 2019 2:05 am 
Offline
User avatar

Joined: Mon Feb 21, 2011 6:38 am
Posts: 395
Location: Czech Republic
Yes, it´s quite common in these photos. Good that we know where the 5in fuse-setters should be :) Also aircraft markings are helpful on some of the other photos.

_________________
My Gallery | At works: 1/700 USS Chicago 8/1942 | 1/700 Kinugasa 8/1942 | Recently completed: 1/700 Yunagi 8/1942


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 216 posts ]  Go to page Previous  1 ... 7, 8, 9, 10, 11

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 29 guests


You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group