*Inj. molded plastic* Upcoming Ship Kit Releases
Moderators: MartinJQuinn, JIM BAUMANN, Timmy C, Gernot
-
Mike E.
- Posts: 348
- Joined: Tue Jun 20, 2006 7:19 am
- Location: Washington, DC
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
The entire Dorsetshire kit has been rescaled EXCEPT for the bridge structure�so you get an undersized bridge. You can modify/chop and use the bridge from the Norfolk kit to get an accurate Dorsetshire kit�but why should you have to? Argh! But honestly, most people won't notice the difference. So if it doesn't really matter to you much, go ahead and get the Dorsetshire kit. And purists can fix it, if they desire.
Last edited by Mike E. on Sun Mar 08, 2020 1:48 pm, edited 1 time in total.
Mike E.
- Haijun watcher
- Posts: 3154
- Joined: Wed Nov 27, 2013 7:06 am
- Location: Vancouver, Canada
- Contact:
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Thank you Maxim.maxim wrote:The kit with the number 808 kit is the one corrected to 1/700 (except of some parts of the bridge). There are not many differences between Dorsetshire's fits of May 1941 and April 1942. Dorsetshire got a single 40 mm on the stern, Type 290 radar on the foremast, and Type 284 radar (with a Type 285 antenna) on the DCT (see British Cruisers Two World Wars and After by Norman Friedman). These parts are either already included or cannot be depicted by plastic parts.
Moderators,
Perhaps this post and the other posts after it can be transferred to the County class CASF thread? I couldn't find similar information on that thread. Perhaps what was said above can help others.
"Haijun" means "navy" in Mandarin Chinese.
"You have enemies? Good. It means you stood up for something in your life."- Winston Churchill
"You have enemies? Good. It means you stood up for something in your life."- Winston Churchill
-
drasticplastic
- Posts: 1439
- Joined: Sun Aug 20, 2017 9:46 am
- Location: Montreal, Canada
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
I just received my Pit Road/Flyhawk IJN Kagero. Pit Road didn't give Flyhawk any credit for the production, either on box, instructions, nor sprues; so the casual buyer might think it is totally Pit Road until they buy a previous release - and are very disappointed! The kit contains under 140 parts, including a stand, which is rather conservative for a Flyhawk kit, but has all the usual attention to detail as Flyhawk kits. Even the upper and lower hulls line up perfectly and the join seam is virtually invisible as it follows a strake line. I'd like to get into building it immediately, but maybe (hopefully) Flyhawk will release a PE set for "1/700 Pit Road Kagero".

-
Dan K
- Posts: 9086
- Joined: Tue Jan 11, 2005 10:56 am
- Location: New York City
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Appreciate the update. Still waiting on my Kagero, but my hopes are high.
-
Dan K
- Posts: 9086
- Joined: Tue Jan 11, 2005 10:56 am
- Location: New York City
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
It arrived. Very, very impressive. Will get started on that review.
- Miguel
- Posts: 1562
- Joined: Wed Feb 09, 2005 5:45 pm
- Location: Abu Dhabi
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Some good news on this dark days.... 1/350 Trumpeter, one of the Tegetthoff Class,I presume is the Viribus Unitis,no clue but the ship is lovely

Also a very interesting 1/350 USN LCAC Hovercraft with some 1/350 USN Carrier deck equipment, some good news for April
http://www.trumpeter-china.com/index.ph ... how&id=178

Also a very interesting 1/350 USN LCAC Hovercraft with some 1/350 USN Carrier deck equipment, some good news for April
http://www.trumpeter-china.com/index.ph ... how&id=178
No Whine Policy
1.- Modify it
2.- Ignore it
3.- Don't build it
1.- Modify it
2.- Ignore it
3.- Don't build it
- mopy
- Posts: 437
- Joined: Sat Jan 12, 2008 12:37 pm
- Location: Zagreb, Croatia
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Or Szent Istvan.Miguel wrote:Some good news on this dark days.... 1/350 Trumpeter, one of the Tegetthoff Class,I presume is the Viribus Unitis,no clue but the ship is lovely![]()
Also a very interesting 1/350 USN LCAC Hovercraft with some 1/350 USN Carrier deck equipment, some good news for April
http://www.trumpeter-china.com/index.ph ... how&id=178
Both were announced by Trumpeter.
Also, eagerly awaiting them.
-
FrancisMcN
- Posts: 275
- Joined: Mon Jan 15, 2007 12:03 pm
- Location: Plymouth UK
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
The English version says Viribus Unitismopy wrote:Miguel wrote:1/350 Trumpeter, one of the Tegetthoff Class,I presume is the Viribus Unitis,no clue but the ship is lovely
- Miguel
- Posts: 1562
- Joined: Wed Feb 09, 2005 5:45 pm
- Location: Abu Dhabi
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Yeah ,now I get it Joint Force = Viribus UnitisFrancisMcN wrote:
The English version says Viribus Unitis
No Whine Policy
1.- Modify it
2.- Ignore it
3.- Don't build it
1.- Modify it
2.- Ignore it
3.- Don't build it
- mister me
- Posts: 605
- Joined: Mon Oct 22, 2012 3:40 am
- Location: Vincennes, FRANCE
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
I presume it is those included in the gallery models/revell/Trumpeter LHDs and LPDs.Miguel wrote:
Also a very interesting 1/350 USN LCAC Hovercraft with some 1/350 USN Carrier deck equipment, some good news for April
http://www.trumpeter-china.com/index.ph ... how&id=178
Can it prefigure a possible edition of gallery Intrepid aircrafts in separate sets (A-4/F-8/A-1) ?
Damn the torpedoes, full speed ahead! - David Glasgow Farragut
- 73north
- Posts: 149
- Joined: Tue Feb 14, 2017 5:10 am
- Location: Scottish Borders , Scotland
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
I can confirm this is the Viribus Unitus as the artwork matches Randall Wilson's artwork he
produced for Trumpeter for the Box-Art several months ago ( he also did the Svent Istvan artwork )
produced for Trumpeter for the Box-Art several months ago ( he also did the Svent Istvan artwork )
-
Guest
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Any idea when we can expect the DIDO classes to be released?
Having bought Exeter and Cornwall, I have foregone York and and Kent in the wait for a Dido.
One of each class will do me.
Exeter or York? Exeter came first and has more historical significance.
No Suffolk, so the 1st County out of the trap, which happened to be Cornwall.
Not enough differences to me to justify buying all versions of Counties - I fell into that trap with the Tribals and the Zerstorers, not to mention all 3 of the Hipper class, so am ,limiting myself to one example of each marque from now on.
One Dido next and that'll do unless they do a smaller DKM cruiser or Leander class.
Having bought Exeter and Cornwall, I have foregone York and and Kent in the wait for a Dido.
One of each class will do me.
Exeter or York? Exeter came first and has more historical significance.
No Suffolk, so the 1st County out of the trap, which happened to be Cornwall.
Not enough differences to me to justify buying all versions of Counties - I fell into that trap with the Tribals and the Zerstorers, not to mention all 3 of the Hipper class, so am ,limiting myself to one example of each marque from now on.
One Dido next and that'll do unless they do a smaller DKM cruiser or Leander class.
- Rob
- Posts: 1067
- Joined: Fri Jan 14, 2005 10:08 am
- Location: Cornwall
- Contact:
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
that artwork is not Szent Istvan. She did not have torpedo nets and had a S/L platform that wrapped round the funnels. This could be any one of the other 3 units
IPMS Fine Waterline Special Interest Group
- drdoom1337
- Posts: 1161
- Joined: Wed Apr 23, 2008 7:40 pm
- Location: New Jersey
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Are there any plans by ANY manufacturer (even a repop in resin) of a 1/700 New Mexico class ship? I remember Midship Models had all 3 in prewar configuration and I know ISW does a 1944 New Mexico. I'd like to build Idaho because it was built in Camden NJ and scrapped in Newark NJ (where I'm from).

-
Dan K
- Posts: 9086
- Joined: Tue Jan 11, 2005 10:56 am
- Location: New York City
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Flyhawk to release its own early war 1/700 USN aircraft set. I'm sure it will be like the IJN set, which makes it an instant winner: https://www.hobbyeasy.com/en/data/uk2vr ... 0dndn.html
-
drasticplastic
- Posts: 1439
- Joined: Sun Aug 20, 2017 9:46 am
- Location: Montreal, Canada
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
So...there's a total of 9 aircraft per kit?Dan K wrote:Flyhawk to release its own early war 1/700 USN aircraft set. I'm sure it will be like the IJN set, which makes it an instant winner: https://www.hobbyeasy.com/en/data/uk2vr ... 0dndn.html
-
burtus05
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
drasticplastic wrote:So...there's a total of 9 aircraft per kit?Dan K wrote:Flyhawk to release its own early war 1/700 USN aircraft set. I'm sure it will be like the IJN set, which makes it an instant winner: https://www.hobbyeasy.com/en/data/uk2vr ... 0dndn.html
I sure hope that Flyhawk will release a US Carrier for those planes. Hopefully a USS Wasp.
- Timmy C
- Posts: 12468
- Joined: Mon Jan 10, 2005 6:00 pm
- Location: Ottawa, Canada
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
No, it says there are 6 sprues, each having 3 aircraft, so 18 total.drasticplastic wrote:So...there's a total of 9 aircraft per kit?Dan K wrote:Flyhawk to release its own early war 1/700 USN aircraft set. I'm sure it will be like the IJN set, which makes it an instant winner: https://www.hobbyeasy.com/en/data/uk2vr ... 0dndn.html
De quoi s'agit-il?
-
Dan K
- Posts: 9086
- Joined: Tue Jan 11, 2005 10:56 am
- Location: New York City
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Just as I'd like a Flyhawk Zuikaku to go along with those aircraft.
6 each of Wildcats, Dauntleses, Devastators, per box.
6 each of Wildcats, Dauntleses, Devastators, per box.
- discoverer 2
- Posts: 181
- Joined: Mon Aug 24, 2009 2:09 pm
- Location: Bergen,Norway
Re: *Inj. molded plastic* Upcoming Ship Kit Releases
Dan K wrote:Flyhawk to release its own early war 1/700 USN aircraft set. I'm sure it will be like the IJN set, which makes it an instant winner: https://www.hobbyeasy.com/en/data/uk2vr ... 0dndn.html
The IJN set?? seen to have missed that.