Ark Royal plans around 1/100 or so

Lyall · Post by **Lyall** » Thu Jul 06, 2006 3:10 pm

Hey guy i need some help i have been looked through most of the link on this forum and can seem to find any one sell blueprints for the ark royal (around 1/100) , so can anyone point me in the right direction, If i can find the blueprints i would proably start in 6 months after prepares and practices abit with wood work this would be my first major wood Scarchbuild project.

Avery Boyer · Post by **Avery Boyer** » Thu Jul 06, 2006 3:31 pm

You might check Taubmann's. Don't know for sure.

psships · Post by **psships** » Thu Jul 06, 2006 3:33 pm

Wich Ark Royal?????

Post by **Timmy C** » Thu Jul 06, 2006 3:40 pm

I'm guessing it's the Ark Royal from NF? The WWII carrier?

Lyall · Post by **Lyall** » Thu Jul 06, 2006 4:10 pm

yes WW2 ark royal srry must have forgot to say that.

Lenalv · Post by **Lenalv** » Fri Jul 07, 2006 2:49 am

Try to mail this guy, http://WWW.hazegray.org
(actoppan@hazegray.org)/Lenny

Lyall · Post by **Lyall** » Fri Jul 07, 2006 6:56 pm

i think i found a plan i ebay he says it 1/32= 1 ft and good detail
http://cgi.ebay.ca/ws/eBayISAPI.dll?Vie ... L:RTQ:CA:1 just not sure if it has all the info i need.

Lyall · Post by **Lyall** » Sat Jul 08, 2006 1:54 pm

Ok thoughs plans weren't the right Type i need judging by info i am reading from books and the int, and i also got a email from the guys a Drydocks say there r no FTW paln for the Ark Royal, so i am going to put this on hold until i have more time to reserach and maybe is a few months a a year there will be some plans out. On that Note does any know it the is TFW plans for the Halifax or Iroquois CLass of the Canadian Navy for R/C control?

Post by **Timmy C** » Sat Jul 08, 2006 2:03 pm

It won't hurt to ask our Department of Defense's public relations about it....other than that they may think you're going to sabotage our ships, heh.

Lyall · Post by **Lyall** » Sat Jul 08, 2006 2:09 pm

I don't think they need my help for that

Ludwig · Post by **Ludwig** » Fri Jul 14, 2006 11:39 am

Hallo Lyall,

Every time I want some plans of a British ship , I write or fax to 'National Maritime Museum' Greenwich, Londen SE10 9NF tel.0044 20 8858 4422 Fax 0044 20 8312 6632. http://www.nmm.ac.uk
They will send you detailled info of the ship you are looking after , for example: K class Destroyer HMS Kelly 1938; they have sent me details of:Profile , Forecastle deck , Upper deck , Lower Deck , Hold , Sections , Docking plan , Lines , Shell expansion 9 plans in total. All this is in scale 1/48 with the prices mentioned. You can choose which plans you need and order them. These plans do not come cheap , but they are worth every penny.
I would say give it a try , and order info on HMS Ark Royal.

Regards,

Ludwig

Lyall · Post by **Lyall** » Fri Jul 14, 2006 5:22 pm

ya i found that they r sending me the order forum for the plan i would it will take a couple week to arrive, i will proably buy the plan and then keep them for later use i think should try more smaller modals before i take on this.

Lyall · Post by **Lyall** » Tue Jul 25, 2006 6:11 pm

ok guys i really need your help for this i have found plans for 1:96 scale of the ark royal 1937 but it had alot of different Plans i was just wonder witch i need, all r 1:96 scale
Line Plan Type
0 Lines NpA5878
1 Body Plan NpA 5901 ( 1:48 )
2 Profile, as fitted Dated 15/08/1939 NpA5905
3 Bridges NPA5902
4 Flight/Upp Gallery Dks NPA5906
5 Lower Gall/Upp hang dks 5908
6 Lower Hnager/Upper dks 5909
7 Main/Lower decks NPA5910
8 Platforms/hold NPA5907
9 Section Forward NPA5904
10 Section Aft NPA5903
11 Flight Deck NPA 5875

I was just wonder which would be the best plans to start the Scratch build with as if i buy all now it can be expenceive they r form the National Marine Museum Royal Observatory Greenwich Tks for the help

nzmatt · Post by **nzmatt** » Thu Jul 27, 2006 6:52 am

sounds like you need all those plans.to do the model.

Lyall · Post by **Lyall** » Thu Jul 27, 2006 7:45 pm

ok well i fingured i need them all i was just wonder which ones would be best for starting the hull with agian the area expenice and i can't afford to buy the all and supplies right now all that the same time. but i fingured i woulld start the hull now and then buy the rest of the plans later, I was think Lines and boby Plan would be good to start, is this Correct?

nzmatt · Post by **nzmatt** » Sat Jul 29, 2006 2:04 am

hello go the lines plan,body plan,profile and flight deck then the rest later

Lyall · Post by **Lyall** » Sat Jul 29, 2006 8:46 am

ok thank matt

ABDA_Krijn · Post by **ABDA_Krijn** » Wed Aug 09, 2006 8:43 pm

i have some overall plans with the ribs

sadly no detail plans and they are in .pdf format

Krijn

mattuk · Post by **mattuk** » Wed Mar 23, 2011 3:40 am

Hi,
I am urgently in need of some plans and sections of the Ark Royal RO7, the latest one, it is for my diploma, that requires me to have built a model within the next week.
Does anyone know where I can get plans and sections quickly?

Thanks for your help

Matt

Cobber · Post by **Cobber** » Tue Sep 06, 2011 2:37 am

@Lyall

can you post to me?

e.mail: ml6294@gmail.com

The Ship Model Forum

Ark Royal plans around 1/100 or so

Ark Royal plans around 1/100 or so

Ark Royal plans

ark royal

ark Royal

Re: Ark Royal plans around 1/100 or so

Re: Ark Royal plans around 1/100 or so