1/200 USS Nimitz

[Song Jung Gun]

Thank you Tom!
It'll most considerable to move, I think so.
The elevator progress . cable fixing places(4),safety nets...
Regards; Song

[Iceman 29]

Nice job, not easy to do..

[Song Jung Gun]

Nice job, not easy to do..

Thank you,Pascal!
The more progress of elevators.
Song

[Fliger747]

Song:

An excellent job on very complex structures. Nice work on the nets, I did a series of those on my 1:192 Missouri for the helicopter deck. I found an open net ribbon material which was excellent for gratings and nets and approximates your result. This is becoming a very spectacular model!

Tom

[Song Jung Gun]

Song:

An excellent job on very complex structures. Nice work on the nets, I did a series of those on my 1:192 Missouri for the helicopter deck. I found an open net ribbon material which was excellent for gratings and nets and approximates your result. This is becoming a very spectacular model!

Tom

Yes it is very complex structure,elevators. I don't think it's long time period.
I start to built starboard structure. At first, foward of no1 elevator.
Thank you always Tom!
Regards; Song

[Fliger747]

Song:

Those complex sponsons look ever so much as part of a "Star Wars" space station! As a traditional craftsman you are adjusting very well to working with new materials!

Best regards! Tom

[dhenning]

Song,
Amazing work again! I will need to add some sponsons to an upcoming carrier build. Any tips on how you determine the shape and dimensions of the sheet that covers the sponson bulkheads?

Dave

[Song Jung Gun]

Song:

Those complex sponsons look ever so much as part of a "Star Wars" space station! As a traditional craftsman you are adjusting very well to working with new materials!

Best regards! Tom

Yes,It looks like space station. I do working with new material as well as wood and same method.
Best regards Song

[Song Jung Gun]

Song,
Amazing work again! I will need to add some sponsons to an upcoming carrier build. Any tips on how you determine the shape and dimensions of the sheet that covers the sponson bulkheads?

Dave

Hi,Dave!
You will do some super carrier model too. I carefully research related drawings and pictures and think built method and procedure At first built frame with thick panel then attach thin panel on the frame.
The next picture shows interior frame .... The starboad sponson of foward #2 elevator.
It will be answer what you want.
Song

[Fliger747]

Song:

Very clever doing the compound curves with thin wood slices! As a note to Dave: With such wood usage alongside plastic, I have had good luck after the initial forming and smoothing of coating the surface with CA and then sanding that, the surface resulting is similar to the plastic.

As always the clever work of the master craftsman!

Regards: Tom

[Song Jung Gun]

Song:

Very clever doing the compound curves with thin wood slices! As a note to Dave: With such wood usage alongside plastic, I have had good luck after the initial forming and smoothing of coating the surface with CA and then sanding that, the surface resulting is similar to the plastic.

As always the clever work of the master craftsman!

Regards: Tom

Thank you,Tom!
I'm not clever But try again and again untill success only.
I've built structure under the island. It's very important and complex opennings with curved surface too.
Best Regards; Song

[Song Jung Gun]

Flat surface and curved attached the frame.

[Fliger747]

Song:

I see that you use the method of making trial paper pieces for the complexly shaped curved pieces. A very good and well tested technique. The layout and cutting of the large number of internal openings I would also rate as being time consuming and requiring considerable good technique. This will be a spectacular ship when completed! Thank you as always for your good photographs and explanations. A learning experience for all of us!

Regards: Tom

[dhenning]

Song,
As they say, "A picture is worth a thousand words." Thank you very much for the photos and explanations. This will be helpful when I have to modify my Ranger kit in the future.

Dave

[Song Jung Gun]

Thank you,Tom and Dave!
I've built crane sponson of starboardside.
The lower part is round type ,so i added thick plate inside of that and cut rounded.
The first one is too wide and made it again.
Song

[Song Jung Gun]

Hi,gentlemen!
It's stern area starboard side.
It's very difficult for me this area.
Song

[Fliger747]

Song:

Yes I can see that this is a complex area to add to the ship, many junctions of plates. located somewhere out in the air and not easy to define. However you have succeeded!

Best regards: Tom

[BB62vet]

Song,

I don't comment often, but just to let you know your project is quite magnificent!!! I do follow your progress.

The sponson work reminds me that years ago (1970's??) I had one of the 1st edition USS ENTERPRISE (1/350) kits from Life Like kits (this was the predecessor of the Tamiya 1/350 scale kits) and one of the starboard sponsons was simply incomplete. I don't know whether it was a manufacturing mistake or what. So, I ended up finishing it with balsa and handcut plastic strips, etc. A major job back in those days. Your work is SO much more accurate and refined.

Hank

[Song Jung Gun]

Song:

Yes I can see that this is a complex area to add to the ship, many junctions of plates. located somewhere out in the air and not easy to define. However you have succeeded!

Best regards: Tom

Thank you,Tom!
It's difficult to define and working procedure.many equipment rooms will added openning area.
Best regards; Song

[Song Jung Gun]

Song,

I don't comment often, but just to let you know your project is quite magnificent!!! I do follow your progress.

The sponson work reminds me that years ago (1970's??) I had one of the 1st edition USS ENTERPRISE (1/350) kits from Life Like kits (this was the predecessor of the Tamiya 1/350 scale kits) and one of the starboard sponsons was simply incomplete. I don't know whether it was a manufacturing mistake or what. So, I ended up finishing it with balsa and handcut plastic strips, etc. A major job back in those days. Your work is SO much more accurate and refined.

Hank

Hi,Hank!
I understand rare comments of my works from you. You have old memories of sponson of aircraft carrier.
I belive your tacit support of this project.
Thank you.
Song