*Inj. molded plastic* Upcoming Ship Kit Releases

Main forum for general questions

Moderators: MartinJQuinn, JIM BAUMANN, Timmy C, Gernot

Post Reply
Mike E.
Posts: 348
Joined: Tue Jun 20, 2006 7:19 am
Location: Washington, DC

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Mike E. »

The entire Dorsetshire kit has been rescaled EXCEPT for the bridge structure�so you get an undersized bridge. You can modify/chop and use the bridge from the Norfolk kit to get an accurate Dorsetshire kit�but why should you have to? Argh! But honestly, most people won't notice the difference. So if it doesn't really matter to you much, go ahead and get the Dorsetshire kit. And purists can fix it, if they desire.
Last edited by Mike E. on Sun Mar 08, 2020 1:48 pm, edited 1 time in total.
Mike E.
User avatar
Haijun watcher
Posts: 3154
Joined: Wed Nov 27, 2013 7:06 am
Location: Vancouver, Canada
Contact:

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Haijun watcher »

maxim wrote:The kit with the number 808 kit is the one corrected to 1/700 (except of some parts of the bridge). There are not many differences between Dorsetshire's fits of May 1941 and April 1942. Dorsetshire got a single 40 mm on the stern, Type 290 radar on the foremast, and Type 284 radar (with a Type 285 antenna) on the DCT (see British Cruisers Two World Wars and After by Norman Friedman). These parts are either already included or cannot be depicted by plastic parts.
Thank you Maxim.

Moderators,

Perhaps this post and the other posts after it can be transferred to the County class CASF thread? I couldn't find similar information on that thread. Perhaps what was said above can help others.
"Haijun" means "navy" in Mandarin Chinese.

"You have enemies? Good. It means you stood up for something in your life."- Winston Churchill
drasticplastic
Posts: 1439
Joined: Sun Aug 20, 2017 9:46 am
Location: Montreal, Canada

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by drasticplastic »

I just received my Pit Road/Flyhawk IJN Kagero. Pit Road didn't give Flyhawk any credit for the production, either on box, instructions, nor sprues; so the casual buyer might think it is totally Pit Road until they buy a previous release - and are very disappointed! The kit contains under 140 parts, including a stand, which is rather conservative for a Flyhawk kit, but has all the usual attention to detail as Flyhawk kits. Even the upper and lower hulls line up perfectly and the join seam is virtually invisible as it follows a strake line. I'd like to get into building it immediately, but maybe (hopefully) Flyhawk will release a PE set for "1/700 Pit Road Kagero".
:wave_1:
Dan K
Posts: 9086
Joined: Tue Jan 11, 2005 10:56 am
Location: New York City

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Dan K »

Appreciate the update. Still waiting on my Kagero, but my hopes are high.
Dan K
Posts: 9086
Joined: Tue Jan 11, 2005 10:56 am
Location: New York City

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Dan K »

It arrived. Very, very impressive. Will get started on that review.
User avatar
Miguel
Posts: 1562
Joined: Wed Feb 09, 2005 5:45 pm
Location: Abu Dhabi

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Miguel »

Some good news on this dark days.... 1/350 Trumpeter, one of the Tegetthoff Class,I presume is the Viribus Unitis,no clue but the ship is lovely :woo_hoo:
Image

Also a very interesting 1/350 USN LCAC Hovercraft with some 1/350 USN Carrier deck equipment, some good news for April
http://www.trumpeter-china.com/index.ph ... how&id=178
No Whine Policy
1.- Modify it
2.- Ignore it
3.- Don't build it
User avatar
mopy
Posts: 437
Joined: Sat Jan 12, 2008 12:37 pm
Location: Zagreb, Croatia

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by mopy »

Miguel wrote:Some good news on this dark days.... 1/350 Trumpeter, one of the Tegetthoff Class,I presume is the Viribus Unitis,no clue but the ship is lovely :woo_hoo:
Image

Also a very interesting 1/350 USN LCAC Hovercraft with some 1/350 USN Carrier deck equipment, some good news for April
http://www.trumpeter-china.com/index.ph ... how&id=178
Or Szent Istvan.

Both were announced by Trumpeter.

Also, eagerly awaiting them. :woo_hoo:
FrancisMcN
Posts: 275
Joined: Mon Jan 15, 2007 12:03 pm
Location: Plymouth UK

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by FrancisMcN »

mopy wrote:
Miguel wrote:1/350 Trumpeter, one of the Tegetthoff Class,I presume is the Viribus Unitis,no clue but the ship is lovely
The English version says Viribus Unitis
User avatar
Miguel
Posts: 1562
Joined: Wed Feb 09, 2005 5:45 pm
Location: Abu Dhabi

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Miguel »

FrancisMcN wrote:
The English version says Viribus Unitis
Yeah ,now I get it Joint Force = Viribus Unitis :rolf_3: I love how Google translates :rolf_3:
No Whine Policy
1.- Modify it
2.- Ignore it
3.- Don't build it
User avatar
mister me
Posts: 605
Joined: Mon Oct 22, 2012 3:40 am
Location: Vincennes, FRANCE

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by mister me »

Miguel wrote:
Also a very interesting 1/350 USN LCAC Hovercraft with some 1/350 USN Carrier deck equipment, some good news for April
http://www.trumpeter-china.com/index.ph ... how&id=178
I presume it is those included in the gallery models/revell/Trumpeter LHDs and LPDs.
Can it prefigure a possible edition of gallery Intrepid aircrafts in separate sets (A-4/F-8/A-1) ?
Damn the torpedoes, full speed ahead! - David Glasgow Farragut
User avatar
73north
Posts: 149
Joined: Tue Feb 14, 2017 5:10 am
Location: Scottish Borders , Scotland

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by 73north »

I can confirm this is the Viribus Unitus as the artwork matches Randall Wilson's artwork he
produced for Trumpeter for the Box-Art several months ago ( he also did the Svent Istvan artwork )
Guest

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Guest »

Any idea when we can expect the DIDO classes to be released?
Having bought Exeter and Cornwall, I have foregone York and and Kent in the wait for a Dido.
One of each class will do me.
Exeter or York? Exeter came first and has more historical significance.
No Suffolk, so the 1st County out of the trap, which happened to be Cornwall.
Not enough differences to me to justify buying all versions of Counties - I fell into that trap with the Tribals and the Zerstorers, not to mention all 3 of the Hipper class, so am ,limiting myself to one example of each marque from now on.
One Dido next and that'll do unless they do a smaller DKM cruiser or Leander class.
User avatar
Rob
Posts: 1067
Joined: Fri Jan 14, 2005 10:08 am
Location: Cornwall
Contact:

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Rob »

that artwork is not Szent Istvan. She did not have torpedo nets and had a S/L platform that wrapped round the funnels. This could be any one of the other 3 units
IPMS Fine Waterline Special Interest Group
User avatar
drdoom1337
Posts: 1161
Joined: Wed Apr 23, 2008 7:40 pm
Location: New Jersey

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by drdoom1337 »

Are there any plans by ANY manufacturer (even a repop in resin) of a 1/700 New Mexico class ship? I remember Midship Models had all 3 in prewar configuration and I know ISW does a 1944 New Mexico. I'd like to build Idaho because it was built in Camden NJ and scrapped in Newark NJ (where I'm from).
Image
Dan K
Posts: 9086
Joined: Tue Jan 11, 2005 10:56 am
Location: New York City

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Dan K »

Flyhawk to release its own early war 1/700 USN aircraft set. I'm sure it will be like the IJN set, which makes it an instant winner: https://www.hobbyeasy.com/en/data/uk2vr ... 0dndn.html
drasticplastic
Posts: 1439
Joined: Sun Aug 20, 2017 9:46 am
Location: Montreal, Canada

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by drasticplastic »

Dan K wrote:Flyhawk to release its own early war 1/700 USN aircraft set. I'm sure it will be like the IJN set, which makes it an instant winner: https://www.hobbyeasy.com/en/data/uk2vr ... 0dndn.html
So...there's a total of 9 aircraft per kit?
:wave_1:
burtus05

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by burtus05 »

drasticplastic wrote:
Dan K wrote:Flyhawk to release its own early war 1/700 USN aircraft set. I'm sure it will be like the IJN set, which makes it an instant winner: https://www.hobbyeasy.com/en/data/uk2vr ... 0dndn.html
So...there's a total of 9 aircraft per kit?
:wave_1:

I sure hope that Flyhawk will release a US Carrier for those planes. Hopefully a USS Wasp.
User avatar
Timmy C
Posts: 12468
Joined: Mon Jan 10, 2005 6:00 pm
Location: Ottawa, Canada

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Timmy C »

drasticplastic wrote:
Dan K wrote:Flyhawk to release its own early war 1/700 USN aircraft set. I'm sure it will be like the IJN set, which makes it an instant winner: https://www.hobbyeasy.com/en/data/uk2vr ... 0dndn.html
So...there's a total of 9 aircraft per kit?
:wave_1:
No, it says there are 6 sprues, each having 3 aircraft, so 18 total.
De quoi s'agit-il?
Dan K
Posts: 9086
Joined: Tue Jan 11, 2005 10:56 am
Location: New York City

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by Dan K »

Just as I'd like a Flyhawk Zuikaku to go along with those aircraft.

6 each of Wildcats, Dauntleses, Devastators, per box.
User avatar
discoverer 2
Posts: 181
Joined: Mon Aug 24, 2009 2:09 pm
Location: Bergen,Norway

Re: *Inj. molded plastic* Upcoming Ship Kit Releases

Post by discoverer 2 »

Dan K wrote:Flyhawk to release its own early war 1/700 USN aircraft set. I'm sure it will be like the IJN set, which makes it an instant winner: https://www.hobbyeasy.com/en/data/uk2vr ... 0dndn.html


The IJN set?? seen to have missed that.
Post Reply

Return to “Main Forum”