Page 28 of 34
Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Tue Jan 21, 2014 2:21 pm
by 109
Mickosh3 wrote:Hi, Bernd!
The illuminator's frames on your hull are looked very realistic!
But let me argue with you a little bit.
The Bismark's hull had no illuminators (portholes) in armored plates! The armored plates were located greatly below!
Please, look at the attached photo. It shows approx. Spt 25. There you can see the position of the armor plates (they are riveted) and rain rails (coamings) above the portholes.
with best regargs-
Anatoly.
Hi Anatoly,
Bow:
These areas include the shell plating of the hull
above the bow armour (60 mm) and reaches up to the 50 mm upper deck armour. Its reaches forward as far as the 50 mm upper deck armour exists and it goes back to the citadel armour. This was made of 35 mm WhnA and towards the stem of 20 mm.
Stern:
These areas include the shell plating of the hull
above the stern armour (80 mm) and reaches up to the 50 mm upper deck armour. Its reaches backwards frame 10.5 and it goes forward to the citadel armour. This was made of 35 mm WhnA.
Bye,
Bernd.
Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Wed Jan 22, 2014 1:26 pm
by Mickosh3
Ok, Bernd, I think it was my fault - I find a short info about 35 mm in my book.
With best regards-
Anatoly.
Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Fri Jan 24, 2014 1:59 pm
by 109
Hi,
first sanding and priming ... obviously more to come ...

Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Tue May 06, 2014 7:17 am
by silvershadow
Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Fri Jun 12, 2015 10:30 am
by Trogdor
Im Curious where you got your plans for your ship i cant find a set of them anywhere?
Thanks Rob
Sorry if this has been asked i didnt see in your blog.
Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Sat Jun 13, 2015 4:27 pm
by ModelMonkey
Brilliant!
Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Sat Jun 13, 2015 8:22 pm
by Richard OMalley
I have been away .Glad too see this build still going !

Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Wed Jul 01, 2015 3:27 pm
by 109
Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Wed Jul 01, 2015 3:28 pm
by 109
Trogdor wrote:Im Curious where you got your plans for your ship i cant find a set of them anywhere?
Thanks Rob
Sorry if this has been asked i didnt see in your blog.
Hi,
I got some plans from a widow and thru the Internet.
Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Wed Jul 01, 2015 3:29 pm
by 109
Richard OMalley wrote:I have been away .Glad too see this build still going !

Thanks! I will resume work soon.
Bye.
Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Sun Aug 09, 2015 1:06 pm
by 109
Hi,
finally some work done on Bismarck. Installed the rest of the portholes. There were two different variants for unarmoured up to frame 10.5) and armoured areas of the outer shell.
Mre to come in the future ...

Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Mon Aug 10, 2015 7:46 am
by Capit�o Norbert
Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Sat Aug 15, 2015 8:11 am
by 109
Hi,
weekend = modeling time
I call the aft ship with its tearoff edge finished in terms of shape.
Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Sat Aug 15, 2015 7:38 pm
by ModelMonkey
Superb!
Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Tue Aug 18, 2015 5:31 am
by 109
ModelMonkey wrote:Superb!
Thanks!
Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Tue Aug 18, 2015 2:32 pm
by dafi
Nice to see you back on track!
XXXDAn
I need your help.
Posted: Thu Sep 17, 2015 10:08 pm
by mzclw
Hello, 109. I am from China, I am sorry, I do not understand English, can only rely on the translation software and your dialogue. It's a shock to see your model! I am also preparing to do a 1:200 Bismarck, want to learn from you, do a little more, but I do not have a very detailed information on the information, I hope to get your help, you can share your drawings to me?
Re: I need your help.
Posted: Sun Sep 20, 2015 10:25 pm
by mzclw
I only have a very low resolution hull details from the site, because I can't see clearly, so I hope to get your help! I am very much to get a clear hull detail to complete my 1:200 Bismarck model more perfectly. This is my email:
250645959@qq.com. thank you all!
Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Wed Sep 23, 2015 1:13 pm
by 109
Hi mzlzr,
I don't have the drawings you mentioned above . You should buy that book. However that drawing seems to be of Tirpitz!!
As for details of Bismarck : there aren't drawings available that shows all details . You need to research all sources and draw your own conclusions!
In 1/2ooth scale most details are so small that you can neglect them.
Also my build report shows all areas in detail.
Okay? Bye
Re: Reconstruction of hull, Battleship BISMARCK, 1/100 scale
Posted: Wed Sep 23, 2015 10:51 pm
by mzclw
Thank you for your reply! Because I am not on the side of the majority of the site, plus the lack of information, so my work has become very difficult. I now have a set of Trumpeter Bismarck 1:200 and PHONTOS27001F super modified, see your work after I feel I am not good enough, I hope to learn from you. I am also considering doing a 1:100, all copper construction, hope you can help! Can you tell me the name of the book? What other Bismarck or Tirpitz's data is available?
Thank you very much!