Removing Acrylic Paint

Post here for tips on modeling.

Moderator: JIM BAUMANN

Post Reply
User avatar
BombMagnet
Posts: 84
Joined: Tue Jun 19, 2012 2:05 am
Location: Germany

Removing Acrylic Paint

Post by BombMagnet »

Anybody got some tips for this? I have some Vallejo Model Air & Model Color that needs to be gone.
User avatar
Jon C Ryckert
Posts: 586
Joined: Sat Jun 06, 2009 12:40 pm

Re: Removing Acrylic Paint

Post by Jon C Ryckert »

I have had good luck just soaking what ever I need stripped in Windex window cleaner. I had to redo the deck of my 1/350 Tamiya !-400 and all I did was keep the deck wet with Windex and with occasional scrubbing with an old brush, the paint was of in about 10-15 minutes. About ten years ago, I took the paint off of an 1/350 Essex class carrier by spraying it with oven cleaner and sealing it in a trash bag. I left it in the bag over night and most of the paint was off after the first try. I don't care for that method as it was unhealthy and nasty. Have heard that some have had good luck doing what I did with Windex but, instead they used Simple Green. Hope this helps you in some way.
User avatar
Cliffy B
Posts: 3125
Joined: Sun Feb 01, 2009 3:55 pm
Location: Hawaii
Contact:

Re: Removing Acrylic Paint

Post by Cliffy B »

I've used Simple Green to get Model Master Acrylics off in the past to good effect. Put them in a plastic tub and sprayed the stuff on full strength and let it soak for a good half a day to a full day and then scrubbed with an old tooth brush and rinsed. Had to repeat it a few times depending on the thickness of the paint but it came off easily.
Drawing Board:
1/700 Whiff USS Leyte and escorts 1984
1/700 Whiff USN Modernized CAs 1984
1/700 Whiff ASW Showdown - FFs vs SSGN 1984

Slipway:
1/700 Whiff USN ASW Hunter Killer Group Dio 1984
User avatar
BombMagnet
Posts: 84
Joined: Tue Jun 19, 2012 2:05 am
Location: Germany

Re: Removing Acrylic Paint

Post by BombMagnet »

Great, thanks! That is something I can definitely give a try.
User avatar
tmodelarmy
Posts: 6
Joined: Sat Feb 13, 2016 3:03 pm

Re: Removing Acrylic Paint

Post by tmodelarmy »

brake fluid DOT3
On the workbench:
1/350 Mikasa + Basic + Super details set (all Hasegawa)
1/350 Varyag (Zvezda) + Eduard detail set
User avatar
jaymz
Posts: 40
Joined: Fri Jan 15, 2016 8:06 pm
Location: Subic, Philippines

Re: Removing Acrylic Paint

Post by jaymz »

i've used denatured alcohol... soaked the kit for a few hours.
also used an old toothbrush (soft bristled) to scrub it off and rinse.

HTH
ALL 1/700 WIPs & Queued... nothing finished! LOL!
Eric Bergerud
Posts: 359
Joined: Thu Apr 01, 2010 10:24 pm

Re: Removing Acrylic Paint

Post by Eric Bergerud »

I stripped a 1/48 TBM - a big plane - using ISP and a tooth brush. It was a mess, but didn't take that long, especially if a little residue is okay when painted over.
Eric
A model boat is much cheaper than a real one and will not sink with you in it.
Hank McCoy
Posts: 23
Joined: Sat May 14, 2011 8:55 am

Re: Removing Acrylic Paint

Post by Hank McCoy »

I use Tamiya acrylics. One day I noticed how easily my wife's gel hand soap took it off my hands . I have a big jug that I put empty bottles in with water and soap, leave them for a while and they rinse out very easily. Hardned paint takes a little scrubbing.
garyrunnalls
Posts: 194
Joined: Mon Mar 22, 2010 12:11 pm
Location: Lawndale, CA USA

Re: Removing Acrylic Paint

Post by garyrunnalls »

For styrene and metal I swear by Dot 3 Brake fluid, then rinse in dishsoap and distilled water. Not good for resin, makes it rubbery.
User avatar
WigWag Workshop
Posts: 1
Joined: Sun Sep 04, 2016 1:40 pm
Location: Central Ohio

Re: Removing Acrylic Paint

Post by WigWag Workshop »

I get great results using Purple Power, which is basically a stronger windex type cleaner. I also use it for kit chrome parts.
User avatar
davidwaples
Posts: 775
Joined: Thu May 03, 2007 10:39 pm
Location: Westminster, Colorado
Contact:

Re: Removing Acrylic Paint

Post by davidwaples »

With Vallejo another vote for Windex window cleaner.
Dave
Post Reply

Return to “Tips and Tricks”