USS Enterprise CV-6 1/700 Meng

Self service picture posting here.

Moderators: MartinJQuinn, JIM BAUMANN, Jon, Dan K

ESzczesniak
Posts: 205
Joined: Mon Dec 08, 2008 8:58 pm

USS Enterprise CV-6 1/700 Meng

Post by ESzczesniak »

I present Meng�s 1/700 USS Enterprise, CV-6. This kit is a �snap kit�, molded in colors and requiring little glue. I built it as a pallet cleanser. Ignoring the air wing, the model was done in 11 days. With the air wing, it was 13 days. I painted the kit and filled the handful of seams necessary. Still, it�s a simple build and I have to say, despite it�s simple origins, it can be built in to a nice ship.
There are some shortcomings. All markings are stickers. I painted the flight deck markings. It�s been a little while, but to my recollection I found the Big-E did not sport the �6� during the Ms. 21 paint scheme. All of the kit�s markings are stickers, so what markings there are on the ship are painted on.
The aircraft insignia use the stickers in puddles of future to blend them. I elected to call the F4F�s earlier models without folding wings. I folded the wings on the TBD�s, and the SBD�s did not have the folding wings.
The kit painting diagram shows a 20B flight deck with 5-H hull. I am not a ship expert, but I do not believe the Enterprise was ever painted this way. My reading was that this kit depicted a late war CV-6, so I painted her in Ms. 21. Tamiya paint was used, leveraging heavily with different mixes of XF-50 and XF-2 for the 20B, 5-N and deck blue stain. Weathering was almost entirely with oils in various techniques (filter, faded, wash, etc).
Here's the end result:

Image

Image

Image

Image

Image

I appreciate any feedback and/or criticism. Thank you for looking!
Eric
Thomas E. Johnson
Posts: 1321
Joined: Wed Jan 26, 2005 10:12 pm
Location: Up The Street From Sam Wilson's House

Re: USS Enterprise CV-6 1/700 Meng

Post by Thomas E. Johnson »

Looks to be a nice kit. I may get one to go with the Missouri kit from Meng, which I like as well.
Thomas E. Johnson
Posts: 1321
Joined: Wed Jan 26, 2005 10:12 pm
Location: Up The Street From Sam Wilson's House

Re: USS Enterprise CV-6 1/700 Meng

Post by Thomas E. Johnson »

This also looks to be more detailed than the Trumpeter 1/700 offering.
Donald
Posts: 81
Joined: Sun Jun 26, 2022 12:20 pm

Re: USS Enterprise CV-6 1/700 Meng

Post by Donald »

Neat work. Like the paint job. These are pretty good models. I spotted the Meng Bismark and Missouri in my local model shop when they first came out and gave them a go. High quality mouldings and plastic, ABS I think. I see Eduard sells PE parts for the Bismark - and perhaps others in the range.
Post Reply

Return to “Picture Post”