1/200 Trumpeter Bismarck 1940 Redux

[Channell]

Thanks Bill! Hope to see some of your Hood build in the future...

[Bill Livingston]

Thanks Jason... although I have a long way to go...!

200 Hood waterlined (which took ages...) with the armour being replaced with scale thickness plastic sheet...

What you don't see in these photos is just how massive this thing is!

[Channell]

Weekly Log #15

Small progress this week but it's another milestone... finished the first 4 of many guns of various types to come:





Here's how they look in place:



And vs the Trumpeter stock 20mm guns:



I'm not entirely sure if I want to keep the shell catchers, I think I need to at least tone them down colorwise. The baskets on the real ship were netting on wire frames near as I can tell and the Pontos additions aren't quite authentic, being they have no bottoms and are technically the wrong shape. Anyway, these things were a pain and took me all day to assemble/paint; they took me right up to the limits of what I can currently do with PE, especially the rack for magazines on the base.

Until next time!

[Channell]

Thanks Jason... although I have a long way to go...!

200 Hood waterlined (which took ages...) with the armour being replaced with scale thickness plastic sheet...

What you don't see in these photos is just how massive this thing is!

Looks promising Bill... I have this kit too and yeah, she's a big girl!

[Stein Gildberg]

Very, very nice build with superb attention to detail!!!

One small correction to your 20mm's: The two "fingers" in front of the cradle is ONE round piece. You may insert a .1mm plastic strip and press the fingers togehter, or attach a round plastic rod instead.
See pictures to understand what I mean (pictures from Oscarsborg in Norway and my own 1:200 Bismarck).

Stein

[Channell]

Good catch Stein, I actually did notice that after I put the guns together... guess that's what I get for following Pontos instructions! It's an easy matter to just glue the two sides together and hit 'em with the the 'ole hairy stick I suppose.

I'd love to see more of your Bismarck, it looks fantastic!



Sorry all but I've gotta give up on the weekly update thing for now... I've had a good run so far but life is full of distractions and my hands needed a rest. More to come soon, however.

[Stein Gildberg]

As you say: An easy fix!
Regarding my Bismarck, I intend to show it on the forum in near future. It was finished two years ago, and is quite extensivly detailed.
Your Bismarck, however, is even more detailed in some areas: The black kick-stripe for instance � I left it out, but I am really impressed that you took the job!

I�ll give away another small goodie for you � if you�re interested: Most (almost all) hatches, porthole shutters etc has a shallow dot in the middle. This dot is to be painted red (as can be seen in many b/w photos). Reason: Those hatches were to be closed in battle / rough sea.
I think it is still not too late to fix this on your model!

If you can get your hands onto Josef Kaiser's book "Das Original" and "Das Model", you can find almost everything you need on detail and rigging of your Bismarck!

[Channell]

I took the holidays off but it about time to get back to work; here's a YouTube video of my current progress:
https://youtu.be/oX-oZJO8Mds

[Surfsup63]

I love the job you are doing on her. I hope I can be half as good with my Tamiya Bismarck Build.....Cheers mark

[Helm]

Awesome work and attention to detail. I've finally started on my own 1/200 Bissy and am following your build closely. Excuse me if I steal some of your ideas, but as they say, imitation is the best form of flattery.

A question - Are you planning on using the PONTOS Adv. Kit 'waterways'? Are they supposed to depict the gutters? How are they installed? I've never seen a similar fitting and pontos instructions are a little unclear on the issue!

[Channell]

Awesome work and attention to detail. I've finally started on my own 1/200 Bissy and am following your build closely. Excuse me if I steal some of your ideas, but as they say, imitation is the best form of flattery.

A question - Are you planning on using the PONTOS Adv. Kit 'waterways'? Are they supposed to depict the gutters? How are they installed? I've never seen a similar fitting and pontos instructions are a little unclear on the issue!

Thanks... sorry all for stalling out for the time being, have a lot going on in the real world at the moment. Hopefully I'll be up and running again soon.

I'm not using the Pontos PE waterways as the scaledecks deck has different dimensions than the Pontos deck and the PE won't fit right, though I'm doing essentially the same thing with (thinner) styrene strips.

Yes, they are supposed to depict the "gutters" along the deck edges and it's true they don't quite accurately depict the feature (they sit level with the deck), but I used them on my Nelson and they really do dress the model up so I'd say they're worth using along with the Pontos deck.

I installed them on the Nelson by painting the PE waterways while they were still on the sheet, then glued them with ca (superglue) after I put the wood deck down. It was fairly easy to do.

[Helm]

Thanks... sorry all for stalling out for the time being, have a lot going on in the real world at the moment. Hopefully I'll be up and running again soon.

I'm not using the Pontos PE waterways as the scaledecks deck has different dimensions than the Pontos deck and the PE won't fit right, though I'm doing essentially the same thing with (thinner) styrene strips.

Yes, they are supposed to depict the "gutters" along the deck edges and it's true they don't quite accurately depict the feature (they sit level with the deck), but I used them on my Nelson and they really do dress the model up so I'd say they're worth using along with the Pontos deck.

I installed them on the Nelson by painting the PE waterways while they were still on the sheet, then glued them with ca (superglue) after I put the wood deck down. It was fairly easy to do.

Thanks for that Jason...I looked up your Nelson thread, but the pictures in your posts seem to have disappeared.
I tried looking at a similar installation online, but what I found left me more confused than before. They seem to place the pieces like bulwarks, extending almost up till the lower chain of the railing, while i'm imagining them to be placed flat on top of the edge of the wood deck.

If its not too much to ask, could you please post a close up of where/how the strip styrene is attached in this build.
Many thanks and keep up the good work.

[Channell]

Thanks for that Jason...I looked up your Nelson thread, but the pictures in your posts seem to have disappeared.
I tried looking at a similar installation online, but what I found left me more confused than before. They seem to place the pieces like bulwarks, extending almost up till the lower chain of the railing, while i'm imagining them to be placed flat on top of the edge of the wood deck.

If its not too much to ask, could you please post a close up of where/how the strip styrene is attached in this build.
Many thanks and keep up the good work.

Sorry about the Nelson pics, long story but they are gone now. Nellie herself still exists in my display cabinet though!



It might be hard to tell in this pic of my Nelson but basically I stuck the deck veneer down, then lined it with the prepainted PE (flat) and ran the railing along the edge of that, leaving a narrow lip between the railing and side of the hull.

On Bismarck, I also put the deck down first but it was not the Pontos deck, was oversized and didn't match the lines of the hull sides in places. After the glue dried on the deck I trimmed along the edges to get enough room to run evergreen strips right up to the edge of the hull sides and blended them into the hull itself, giving me a clean edge and the effect that the deck was "inletted" into the hull rather than just stuck on top. There are lots of close-up pics, just look at the edges with the deck and it should be clear enough.

[Joe Simon]

Just looked through this. It looks great! That Nelson is huge! I also love the deck. Really adds to this. One curiosity, why 2 Bismarcks?

[Channell]

Just looked through this. It looks great! That Nelson is huge! I also love the deck. Really adds to this. One curiosity, why 2 Bismarcks?

I started building one back when the kit was first released:( viewtopic.php?f=59&t=121249 ) and got maybe 80% done but I dropped it in a snowy parking lot during a move and the whole project ended up on the "shelf of doom".

Meanwhile, I'd gotten better at building and the aftermarket offerings for the kit got pretty impressive too... even back on the first build I was really pushing myself for a hardcore build of the ship so I decided to have another go.

The 1/100 Bismarck semi kit was an impulse buy a few years ago that I got a good deal on... I'm saving it for retirement.

[fooesboy]

Sorry about the Nelson pics, long story but they are gone now. Nellie herself still exists in my display cabinet though!

NOOOOOOO!
I was hoping to use them as inspiration/guide once I finally plucked up the stones to start.

[steinerman]

Jason, you have a PM.

[Channell]

Summer is nearly over, amazing how fast time goes by. Anyway, I'm back to work on my big Bissy.

New progress thus far are a couple levels of forward superstructure, assembly of the aircraft catapult and some general clean up; I figure I'll focus on the lower superstructure sections for now, then branch upwards and outwards and see how far I get before I'm burned out again.

There's no big rush or timetable to keep to so I'll just keep my building strictly for fun and see where it takes me.

[Jabberwock]

Jason back in the saddle!

Great to see you back.

Cheers, Jabb

[steinerman]

Jason back in the saddle!

Great to see you back.

Cheers, Jabb

Time to celebrate! Bring out the wine and the funny hats!