Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

For the exclusive use of Modelwarships.com sponsors. Post your specials and in-stock notices here.

Moderators: MartinJQuinn, Timmy C, Gernot, HMAS

Post Reply
User avatar
Jack Pentz
Posts: 16
Joined: Wed Nov 25, 2009 11:14 am
Location: Oak Ridge, North Carolina

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by Jack Pentz »

Hi Kim,

Have you released set 35005F1 for the Ticonderoga CV-14 Essex Class? I do not see it listed on your website. If so, have you sent some sets to FreeTimeHobbies as I normally purchase through them?

Any update would be appreciated.

Best regards,

Jack
"No captain can do very wrong if he places his ship alongside that of the enemy."
Vice Admiral Horatio Nelson
User avatar
Pontosmodel
PontosModel
PontosModel
Posts: 1002
Joined: Fri Jun 24, 2011 1:26 am
Location: Korea
Contact:

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by Pontosmodel »

Jack Pentz wrote:Hi Kim,

Have you released set 35005F1 for the Ticonderoga CV-14 Essex Class? I do not see it listed on your website. If so, have you sent some sets to FreeTimeHobbies as I normally purchase through them?

Any update would be appreciated.

Best regards,

Jack
Yep Brandon ordered All Essex class sets fully.
And he may have 35004f1 Yorktown now.
Now we are editing Instruction manuals of 35005F1 Ticonderoga 1944 and 35006F1 Essex 1943 set at the same time and I think we will formally release at 6th July for both 35005F1 and 35006F1 at the same day.

Image

Thank you
Kim
aptivaboy
Posts: 404
Joined: Sun Mar 14, 2010 2:32 pm

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by aptivaboy »

Gorgeous! There goes my summer money!

One question, has it been confirmed that Essex had just the one catapult as built? There was a discussion on this site or the other one a year or two back that she actually was commissioned with two. I always thought she only had the one as built, but some folks were very vociferous that she always had two. Has there been resolution on this point?

Many thanks for your hard work. I just got your CVL deck and PE yesterday and it looks super.
User avatar
Pontosmodel
PontosModel
PontosModel
Posts: 1002
Joined: Fri Jun 24, 2011 1:26 am
Location: Korea
Contact:

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by Pontosmodel »

aptivaboy wrote:Gorgeous! There goes my summer money!

One question, has it been confirmed that Essex had just the one catapult as built? There was a discussion on this site or the other one a year or two back that she actually was commissioned with two. I always thought she only had the one as built, but some folks were very vociferous that she always had two. Has there been resolution on this point?

Many thanks for your hard work. I just got your CVL deck and PE yesterday and it looks super.
CVL is also a good choice.
Same Blue deck tone with Essex class.

Essex has one Catapult at least from Dec. 42 to the end of WWII or to Korean War.
And additional port side Catapult(fitted after WWII or 50's) is longer than that of WWII era Essex class.

So our Essex 1943 Detail up set has one Catapult.

Thank you
Kim
User avatar
Pontosmodel
PontosModel
PontosModel
Posts: 1002
Joined: Fri Jun 24, 2011 1:26 am
Location: Korea
Contact:

Finalized Essex Class First project.

Post by Pontosmodel »

Hi our friends,
Finally Finally we've finalized the first Essex Class project with releasing CV-14 Ticonderoga 1944 and CV-9 Essex 1943 Detail up sets.

Image
Image
Image

You can see this set in more detail at
http://pontosmodel.com/html/35005f1.html
http://pontosmodel.com/html/35006f1.html
http://pontosmodel.com/html/35004f1.html

Anyway this Finalization means you can start to realize the Murderers Row at Ulithi Anchorage one of the famous naval histroy fact. :big_grin:
Image

It is easy work with our sets from now. Just Try and Enjoy!
Image

Thank you
Keumho Kim
User avatar
MartinJQuinn
Posts: 8561
Joined: Tue Jan 11, 2005 1:40 pm
Location: New Jersey

Re: Finalized Essex Class First project.

Post by MartinJQuinn »

Pontosmodel wrote:Image
Dang - those are nice. If only I wasn't so far along with my 1/350 CV-12.
Martin

"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learned something from yesterday." John Wayne

Ship Model Gallery
User avatar
amiers
Posts: 283
Joined: Mon Jan 10, 2005 4:42 pm
Location: Brisbane, Australia

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by amiers »

MR Kim. would it be possiable to give us a list and @date for upcomming sets? i for one would put my kits on hold if i knew what and when you will be releasing them. for example on my shelf is scharnhorst, bismarck,tirpitz, hipper, Queen Elizabeth, Z25/39,lexinton and a few more!!!
User avatar
Pontosmodel
PontosModel
PontosModel
Posts: 1002
Joined: Fri Jun 24, 2011 1:26 am
Location: Korea
Contact:

Re: Finalized Essex Class First project.

Post by Pontosmodel »

MartinJQuinn wrote: Dang - those are nice. If only I wasn't so far along with my 1/350 CV-12.
Try with 35006F1 CV-9 Essex Class 1943, this set can realize CV-12 Hornet 1944 version.
All necessary PE, decals and Masking sheets are included for CV-12.
Thank you
Kim
Last edited by Pontosmodel on Tue Jul 10, 2012 1:48 am, edited 1 time in total.
User avatar
Pontosmodel
PontosModel
PontosModel
Posts: 1002
Joined: Fri Jun 24, 2011 1:26 am
Location: Korea
Contact:

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by Pontosmodel »

amiers wrote:MR Kim. would it be possiable to give us a list and @date for upcomming sets? i for one would put my kits on hold if i knew what and when you will be releasing them. for example on my shelf is scharnhorst, bismarck,tirpitz, hipper, Queen Elizabeth, Z25/39,lexinton and a few more!!!
Please visit
http://pontosmodel.com/350dt.html

Above page shows this year project. 1/200 Bismarck may be added just after 1/350 KGV.

And Scahrnhorst and Hipper may come at next year.

Thank you
Kim
User avatar
simon b
Posts: 743
Joined: Mon Jan 10, 2005 2:15 pm
Location: Northants, UK
Contact:

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by simon b »

Hi Kim

How about an update for the cvn 65 enterprise.
Theres only a couple of sponsors to alter, add in all the domes and some platforms as well as copulous amounts of PE.
User avatar
Pontosmodel
PontosModel
PontosModel
Posts: 1002
Joined: Fri Jun 24, 2011 1:26 am
Location: Korea
Contact:

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by Pontosmodel »

simon b wrote:Hi Kim

How about an update for the cvn 65 enterprise.
Theres only a couple of sponsors to alter, add in all the domes and some platforms as well as copulous amounts of PE.
I am not a Yesman.
But CV-65 is in our range.
We will do much more than what you can dream.
Only trouble is that we need much time to come true.

Thank you
Kim
USNATC

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by USNATC »

Would a modern 1/350 trumpeter Nimitz class be out of the question?
Heavy Melder
Posts: 412
Joined: Wed Sep 08, 2010 5:00 am
Location: London, Ontario, Canada

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by Heavy Melder »

Pontosmodel wrote:
simon b wrote:Hi Kim

How about an update for the cvn 65 enterprise.
Theres only a couple of sponsors to alter, add in all the domes and some platforms as well as copulous amounts of PE.
I am not a Yesman.
But CV-65 is in our range.
We will do much more than what you can dream.
Only trouble is that we need much time to come true.

Thank you
Kim
If you're taking requests, how about doing one of your full on super sets like these for the Hasegawa 1/350 Akagi? I've been waiting too long for the WEM vapourware set.
Aaron Propper
"I don't understand any of this! But when we get in the giant robots, WE MUST FIGHT!"

"This is how Admiral Okita fights."
USNATC

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by USNATC »

Went down to the NATS today and could not walk away without one. I got the Yorktown update and was not disappointed, even though the display was a little worse for wear the quality and amount of pieces is outstanding. If you are thinking about one of these sets, do yourself a favor and just get one.
User avatar
Devin
Posts: 2503
Joined: Mon Jan 10, 2005 10:46 am
Location: Hoboken, NJ
Contact:

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by Devin »

I got to see these in person at the NATS. I was tempted, I have to admit. If I didn't have both GMM sets for my '43 Essex, I'd have considered it. One thing I'd like to have seen, though, are replacements for the splinter shields on the bridge levels and AA gun positions. I've had to sand and shape every one on the Essex as the kit parts are too thick, and often have a nasty mold seam. It'd be a lot more brass, of course, but if you're going to go this far, then I figure you should go all the way.

If you guys ever do a CV-2 Lexington set, I'll definitely get one.
We like our history sanitized and theme-parked and self-congratulatory, not bloody and angry and unflattering. - Jonathan Yardley
User avatar
MartinJQuinn
Posts: 8561
Joined: Tue Jan 11, 2005 1:40 pm
Location: New Jersey

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by MartinJQuinn »

Devin wrote:If I didn't have both GMM sets for my '43 Essex, I'd have considered it.
Yeah, same here. Hence my comment in an earlier post. Of course, I could just build another of the class... :heh:

My only comment after seeing this photo - isn't the deck too dark for the mid-war flight deck stain? Shouldn't the decks be more "Ocean Gray-ish" than "Deck Blue-ish" for 1943 into mid-1944? I traded with someone for a CVL-22 deck, and while the deck is beautiful, it's the the same thing - it's deck blue. I am not sure if that is the correct color for the time frame.
Martin

"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learned something from yesterday." John Wayne

Ship Model Gallery
User avatar
Devin
Posts: 2503
Joined: Mon Jan 10, 2005 10:46 am
Location: Hoboken, NJ
Contact:

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by Devin »

Yes, probably a little bit dark. Not sure if you could sand it a bit and lighten it up.

One of the other reasons for not buying the set is that I wouldn't use the wood deck. Not a fan of them.
We like our history sanitized and theme-parked and self-congratulatory, not bloody and angry and unflattering. - Jonathan Yardley
User avatar
Pontosmodel
PontosModel
PontosModel
Posts: 1002
Joined: Fri Jun 24, 2011 1:26 am
Location: Korea
Contact:

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by Pontosmodel »

USNATC wrote:Would a modern 1/350 trumpeter Nimitz class be out of the question?
This is next year project with LHD Wasp.
Thank you
Kim
User avatar
Pontosmodel
PontosModel
PontosModel
Posts: 1002
Joined: Fri Jun 24, 2011 1:26 am
Location: Korea
Contact:

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by Pontosmodel »

Heavy Melder wrote: If you're taking requests, how about doing one of your full on super sets like these for the Hasegawa 1/350 Akagi? I've been waiting too long for the WEM vapourware set.
At least we would not release Akagi set by next year. Already fulled next year schedule...

Thank you
Kim
User avatar
Pontosmodel
PontosModel
PontosModel
Posts: 1002
Joined: Fri Jun 24, 2011 1:26 am
Location: Korea
Contact:

Re: Pontosmodel 1/350 USS Essex Class AC Detail Up Sets

Post by Pontosmodel »

MartinJQuinn wrote:
Devin wrote:If I didn't have both GMM sets for my '43 Essex, I'd have considered it.
Yeah, same here. Hence my comment in an earlier post. Of course, I could just build another of the class... :heh:

My only comment after seeing this photo - isn't the deck too dark for the mid-war flight deck stain? Shouldn't the decks be more "Ocean Gray-ish" than "Deck Blue-ish" for 1943 into mid-1944? I traded with someone for a CVL-22 deck, and while the deck is beautiful, it's the the same thing - it's deck blue. I am not sure if that is the correct color for the time frame.
Devin wrote:Yes, probably a little bit dark. Not sure if you could sand it a bit and lighten it up.

One of the other reasons for not buying the set is that I wouldn't use the wood deck. Not a fan of them.
You can rely on this tone of blue deck because I got real plank sample from Essex....(Joke!)

But I think the real deck blue is more darker than ours.
We selected this tone because we are sure taht it is easier work to make tone be lighter than darker from light.
Just enjoy our blue deck.

Kim
Post Reply

Return to “Manufacturers and Suppliers”