Calling all Queen Elizabeth-class (1914-1947) fans

Battleships and Battlecruisers of all nations and eras.
BB and BC.

Moderators: BB62vet, MartinJQuinn, Timmy C, Gernot, Olaf Held, Dan K, HMAS, ModelMonkey

Post Reply
User avatar
Frank O'Neill 2025
Posts: 92
Joined: Thu Jan 27, 2005 8:25 pm

Re: Calling all HMS Queen Elizabeth class fans

Post by Frank O'Neill 2025 »

Hi all-
Just back from the show in Orlando where I picked up the Academy Warspite and the matching Pontos detail set. I'm looking for some color info. I want to try to replicate the ship in the D-day scheme and am looking for some color equivalents of the acrylic variety. I've checked the suggested numbers from the Vallejo cross-reference chart and they look WAY off to me. Any assistance, as always, would be greatly appreciated.
JCRAY
Posts: 633
Joined: Sun Feb 08, 2009 3:18 pm
Location: Palm Beach, Fla

Re: Calling all HMS Queen Elizabeth class fans

Post by JCRAY »

Try Harry at Battlefleet models, he has the new testors paints including British colors that aren't enamel. It is my understanding that warspite wore AP 507C & AP 507B. 507 B was a 50/50 mix of 507 A & 507 C . If i'm wrong JS will correct me. hth
User avatar
Moeggo
Posts: 10
Joined: Sun Jul 22, 2012 8:59 pm
Location: Wellington, New Zealand

Re: Calling all HMS Queen Elizabeth class fans

Post by Moeggo »

A bump for my question, as it will apply to frank....
Moeggo wrote:Hey Guys!

Its my first post here.. I am normally a Aircraft guy but have been getting the itch to build a couple of ships! So I have picked up 1/350 Hasegawa Nagato, Hobby Boss Arizona and the Academy Warspite!

Having no info at all on anything that floats without wings... Hopefully you guys can help or point me in the right direction...

I would like to model my Warspite off this photo of her off the coast of Normandy during the invasion...

Image

Are there any major exterior changes/mods that I need to take into mind, by using the 1942 boxing from Academy and building her to a June 1944 spec?
Dave Johnson
Wellington, New Zealand
User avatar
Frank O'Neill 2025
Posts: 92
Joined: Thu Jan 27, 2005 8:25 pm

Re: Calling all HMS Queen Elizabeth class fans

Post by Frank O'Neill 2025 »

Thanks JCRAY. I totally forgot about the Model Master paints. I emailed Harry at Battlefleet to see if they are in stock.
User avatar
Frank O'Neill 2025
Posts: 92
Joined: Thu Jan 27, 2005 8:25 pm

Re: Calling all HMS Queen Elizabeth class fans

Post by Frank O'Neill 2025 »

Well, it looks like a no-go on the Testors paints. The 507-c is enamel only and I have to stick to the acrylic. I have looked at the vallejo charts and the 507-c looks spot on when matched to the White Ensign paint that I have. The question I have is the 507-b. The vallejo match looks REALLY blue to me when Warspite is traditionally done in more of a dark gray. Can anyone speak to the accuracy of the vallejo match for 507-b? Was it really more blue than gray? Does anyone have any paint formulas they would like to share? Got some info by pm on some Tamiya possibilities but without exact ratios I'm a bit timid to try.
User avatar
Ensign Jay
Posts: 167
Joined: Sat May 14, 2011 9:42 pm
Location: Australia East coast

Re: Calling all HMS Queen Elizabeth class fans

Post by Ensign Jay »

Have a go at mixing your colours till you are happy with it - the final shade will vary depending on where the model is situated - in daylight or under artificial light , incandecent or flourecent ( spelling :smallsmile: )

cheers Jay
"Let's make sure that history never forgets the name... Enterprise"
User avatar
Timmy C
Posts: 12446
Joined: Mon Jan 10, 2005 6:00 pm
Location: Ottawa, Canada

Re: Calling all HMS Queen Elizabeth class fans

Post by Timmy C »

Are you sure they don't have 507C in acrylics? Testor's site shows it as an item (though not 507B): http://www.testors.com/products/561970
De quoi s'agit-il?
User avatar
Frank O'Neill 2025
Posts: 92
Joined: Thu Jan 27, 2005 8:25 pm

Re: Calling all HMS Queen Elizabeth class fans

Post by Frank O'Neill 2025 »

Hi Timmy-
I was wrong, it's the 507-B that's holding me up. According to Harry at Battlefleet (I spoke with him by phone) it's only available in enamel. The Testor's site does list the 507-A and 507-C in acrylic though. If I remember correctly though 507-B was a 50/50 mix of 507-A and 507-C, so I should theoretically be able to make my own acrylic 507-B. Can anyone confirm these ratios?
Thomas E. Johnson
Posts: 1321
Joined: Wed Jan 26, 2005 10:12 pm
Location: Up The Street From Sam Wilson's House

Re: Calling all HMS Queen Elizabeth class fans

Post by Thomas E. Johnson »

Frank O'Neill wrote:Hi Timmy-
I was wrong, it's the 507-B that's holding me up. According to Harry at Battlefleet (I spoke with him by phone) it's only available in enamel. The Testor's site does list the 507-A and 507-C in acrylic though. If I remember correctly though 507-B was a 50/50 mix of 507-A and 507-C, so I should theoretically be able to make my own acrylic 507-B. Can anyone confirm these ratios?
That mixing ratio is confirmed by information on the HMS Hood Association website.
User avatar
Jim21680
Posts: 175
Joined: Wed Jun 27, 2012 8:29 pm
Location: Philadelphia, PA

Re: Calling all HMS Queen Elizabeth class fans

Post by Jim21680 »

It's such a shame none of the Queen Elizabeths were saved. If there was ever a battleship worthy of it, it was one of these.
I would like to have seen Montana...
User avatar
Timmy C
Posts: 12446
Joined: Mon Jan 10, 2005 6:00 pm
Location: Ottawa, Canada

Re: Calling all HMS Queen Elizabeth class fans

Post by Timmy C »

Frank O'Neill wrote:Hi Timmy-
I was wrong, it's the 507-B that's holding me up. According to Harry at Battlefleet (I spoke with him by phone) it's only available in enamel. The Testor's site does list the 507-A and 507-C in acrylic though. If I remember correctly though 507-B was a 50/50 mix of 507-A and 507-C, so I should theoretically be able to make my own acrylic 507-B. Can anyone confirm these ratios?
I imagine Testors came to the same conclusion - if they had to penny-pinch and pick two of the three to produce, A and C makes the most sense if it's a straight-forward 1:1 mix for a B.
De quoi s'agit-il?
EJFoeth
Posts: 2909
Joined: Wed Jan 21, 2009 1:51 pm

Re: Calling all HMS Queen Elizabeth class fans

Post by EJFoeth »

Hoping that the mix of those two Testor colors would give the same result. But on the other hand, you'll find many patches of different shades of gray on a ship that's supposed to be an even 507B, so no problems there. :smallsmile:
Last edited by EJFoeth on Mon Nov 26, 2012 10:51 am, edited 1 time in total.
mifune
Posts: 113
Joined: Sat Feb 23, 2008 3:02 pm

Re: Calling all HMS Queen Elizabeth class fans

Post by mifune »

mifune wrote:I really hope that Trumpeter`s Warspite will have early war option.

Does anyone have pictures pictures showing her DG cable?

And I know they were moved inside during her USA repair/refit.

Found something again from British Pathe films. Took me some hours. Clip named Troops arrive at a middle east port. Dated 1946 but clearly 1940. Shows Warspite with DG.
Mikko Saarela

Measure twice, cut once. Measuring once could be quicker...
User avatar
Christian M.
Posts: 967
Joined: Sat Oct 06, 2012 4:34 pm
Location: Cologne / Germany, sometimes Poznan/ Poland and Chessington/ UK

Re: Calling all HMS Queen Elizabeth class fans

Post by Christian M. »

Hello,

may I have overseen it in that 25 pages here, so sorry in advance if this is the case. :wave_1:

In Academy kit of HMS Warspite are 2 small lifeboats -beside the big ones which are positioned between funnel and cranes, also left and rigt of aft mast- in sprue "F". Unfortunatelly it is not told in instruction where this small ones have to be installed to. So I'm not sure if they are only superluous inside the kit and, too, looking in gallery here, they are sometimes not installed and if installed on several different places. Original which fotos I know or have do not show them really, but maybe on one of them (I can and will not show, because unclear copyright issue) are the arms of david pulleyes visible between the two 10.2cm twin guns.

Does anyone know more about / has informations about?

Cheers,
Christian
The advantage of wisdom is that you can play dumb; conversely, it is more difficult.
mifune
Posts: 113
Joined: Sat Feb 23, 2008 3:02 pm

HMS Valiant cranes...

Post by mifune »

Were "bent arm type". How have I overlooked this in photos until now...

Can I use the ones in Repulse instead of QE?

AArghh!
Mikko Saarela

Measure twice, cut once. Measuring once could be quicker...
moimeme

Re: Calling all HMS Queen Elizabeth class fans

Post by moimeme »

Hi

Perhaps was this already discussed but I can't find anything about this when searching in the forum so I ask here :

what about painted/unpainted barrel section near muzzle of british 15inch guns ?

sometimes it looks evident they are unpainted, but -especially with multicoloured camos- on other pictures, barrels seem to be painted.
it is sometimes hard to be sure with black and white pictures.

or is it a prewar/war matter ? (unpainted during prewar period ?)

some modelers certainly use some artistic licence because I can find pictures of models of WWII 1943 Queen Elizabeth in both configurations.

thank you
Phil from Manang

Queen Elizabeth 1944/45

Post by Phil from Manang »

Could anyone help me with information regarding the 1944/45 BPF QE? In particular, the twin powered oerlikons, universally listed as 29 in number, and six of which were sited, three each side, on the boat deck, directly behind the pom poms. If you look at page 15 of the Shipcraft Queen Elizabeth Class Battleships by Les Brown there is a picture of a late 1943 QE, after the 20 mm twins were installed and with them actually quite visible. The question I have is: What were the dimensions of the platform on which they were sited. They clearly superfire over the pom poms, so they were raised either in individual stands or on some sort of(probably rectangular) stand which accomodated the three. Raven and Roberts, who do confirm the disposition of the mountings, do say that information on the 1944/45 QU is a little scarce, but with what you have it looks as if it would be easy to convert the Trumpeter 1/350 kit to that period if we knew exactly what was going on on that boat deck. The boats had been moved to the deck where the catapult had been, it having been removed in the last refit, so if you would happen to know the precise number and placing of the boats that would be good. Any information, or even a consensus of opinion, would be greatly appreciated.
Phil
User avatar
Atma
Posts: 3134
Joined: Fri Apr 16, 2010 6:47 pm
Location: Oslo, Norway

Re: Calling all HMS Queen Elizabeth class fans

Post by Atma »

http://www.freetimehobbies.com/TRP5780.aspx
Trumpeter's HMS Warspite 1915, whats the verdict ? Is it accurate, how is different from the already released HMS Queen Elizabeth 1918 ?
Comparing the HMS Queen Elizabeth 1918 with the Warspite's 1915 instructions I see no difference whats so ever, I fear is just a HMS Queen Elizabeth 1918 reboxed with a HMS Warspite artwork...
Thanks in advance. :thumbs_up_1:
User avatar
Quincy
Posts: 2217
Joined: Fri Apr 08, 2005 9:41 am
Location: Monson, MA.

Re: Calling all HMS Queen Elizabeth class fans

Post by Quincy »

Blatz! :censored_2: Still no 1/700 WW2 HMS QE or Warspite as of yet!



Bob Pink. :wave_1:
User avatar
von.Dellwig
Posts: 19
Joined: Tue Dec 20, 2011 1:37 pm
Location: Hergolshausen, Germany

Re: Calling all HMS Queen Elizabeth class fans

Post by von.Dellwig »

Hello,
I hope I didn�t miss this somewhere in the forum but can someone please tell me what colour (WEM Colourcoats) the Warspite`s steeldecks were painted in 1942 and 1943? I think I will use 507B and 507C for the camouflage but I am not sure with the decks...
Thank you!

Cheers Ingo
Post Reply

Return to “Battleships”