The Ship Model Forum

Hi Ron
I saw your 1/72 Duane on the sight . When did you make her ?

_________________
If you are not living on the edge then you are taking up to much space

The last one I built before I started Helena, she's in completed models on this site, there's still a little work to be done, I stopped work on it when I first took bad ,over 2 years ago.

_________________
Simple but effective.

Have to say those are some really nice models. Served 3 yrs in New Bedford,MA on the Unimak and then 2yrs at a small boat station in the UP of Michigan. When I went to DC school I saw a '95 ft Cape class at Yorktown,finally was able to purchase the Revell kit. Going to have to start that soon.


Pete

Hi Pete
I am from West Yarmouth on the Cape .I am working on a 1/48 Taney . I have the revel model of it .Is that what you have ?

_________________
If you are not living on the edge then you are taking up to much space

Yup, that's what I have. I also have the Revell 1/400 or so scale kit of the Taney, a buddy of mine gave me a model of the Taney that an Uncle of his had put together as a kid. I think I'm going to do my Taney kit as the BiBB since that cutter tied up in the same home port as the Unimak.


Pete

I've finished the first two production ships (out of eight in the first run). These will be available around Sept. 1 for US $775. I'm awaiting some custom photo-etched brass for railings. More details later.





These will also be available as full hull models.

Plonan
125' looks great .Were did you get the pans for it ?

_________________
If you are not living on the edge then you are taking up to much space

I believe I got the scantlings from the US Library of Congress "Historic American Buildings Survey/Historic American Engineering Record." Otherwise it was the Historical Naval Ships Association. Sorry I'm not more specific, as I downloaded the scantlings and renamed it, so I could find it on my computer. The L of C section has complete drawing of the Southern Pacific tug "Hercules," and a number of others.

I derived the superstructure from profile photographs and one straight on bow photo. Other spacings can be derived by observing items like rescue boats, which have a known length.

If anyone has pictures or plans for the ATA-202 Comanche, Sotoyomo class auxiliary ocean tug would you please contact the Comanche 202 Foundation [url]ata202@live.com[/url]. It was turned over to the Coast Guard and was eventually picked up by the foundation for restoration. Her home port is Tacoma, WA. They would appreciated any information they can get. Thanks.

_________________
Any ship larger than a Destroyer is a waste of metal.

Are there still any USCG cutter fans out there? I'm making one in CAD for 3D printing in both 1/350 and 1/700 scales. Specifically, I am making USCGC Bertholf (WMSL-750) and am thinking about posting my work to date, if there is any interest out there.

_________________
Completed:
1/350 USS Missouri (BB-63) * 1/350 USS England (DE-635) * "Underway Personnel Transfer" Diorama

In Progress:
1/350 USS Bennington (CV-20)
1/144 USS Greenling (SSN-614) - ACAD/3D Printing
1/144 USS Batfish (SS-310) - ACAD/3D Printing

I would be interested in seeing your work on the Berholf .I will be making a fiberglass hull of Berholf in 1/48 scale at the beginning of the year .
Richard

_________________
If you are not living on the edge then you are taking up to much space

Wow Richard! 1/48 scale? She is going to be huge, some 8-9 feet long. How cool is that.
Here's the link to the thread I have started.

viewtopic.php?f=27&t=152833

_________________
Completed:
1/350 USS Missouri (BB-63) * 1/350 USS England (DE-635) * "Underway Personnel Transfer" Diorama

In Progress:
1/350 USS Bennington (CV-20)
1/144 USS Greenling (SSN-614) - ACAD/3D Printing
1/144 USS Batfish (SS-310) - ACAD/3D Printing

Hi
The 1/48th Berholf will be 104.449" long .The first hull will go to a retired USCG Commander .It will be for RC and have a working " notch "Thank you for your link .It is very impressive !

_________________
If you are not living on the edge then you are taking up to much space

Hi Everyone
I finished the master for the 327' Treasury Class Cutter .



One half of the mold is done .

_________________
If you are not living on the edge then you are taking up to much space

Here's a link to an 83' cutter I recently made in 1/72nd scale on one of my fiberglass hulls;

http://www.flickr.com/photos/25721684@N ... 2269542118

Regards, Christian.

I know that it is some time since you started this post but i am also interested in building a 1/35 scale model of the island class cutters. I have the builders plans, a large sheet of the line drawings and deck plans, plus 6 smaller sheets of the internal layouts. If anyone has any helpful suggestions regarding such a build they would be very much appreciared, also any photos of these boats would be helpful. I do have some pictures taken of the internet plus some sent to me by ex uscg personell who have served on these boats. I am also happy to share the plans if anyone is interested. I have built the hull framework but realised that by the time i plank it it will be oversize so have to start again.
M[color=#FF8040][/color]

I see this is an older thread, but I'm a brand new member. I have some great photos of an Island Class 110-foot WPB from a former Coastguardsman, who served aboard USCGC Chandeleur, WPB-1311.
I haven't learned to post pictures yet.

I've also got 1/700 resin waterline kits of the Point Class 82-foot Cutter for interested Micro-maniacs!

whoa! that sounds nice! made em yourself? any pics?

I did! Casting these in Smooth-on liquid polyurethane plastic continues.
A lot has happened here since 2016. Except my photo-posting skills remain similar.
Resin USCG cutter kits include 1/700 Island class, 1/350 and 1/700 Point class WPB's, 1/700 USRC cutter Caleb Cushing,

and a recent release of 1/350 USCG Reliance class WMEC with waterline and full-hull options.



Work continues on 1/700 USCG Reliance class and Thetis class 165' WPC (B) cutters and an AG-25, USS Potomac version of the same hull. I wonder if Tim will allow posting a link to my website? tlarmodels.com
I hope so!

1/350 CGC Active, WMEC-618 got her finishing touches and made her model contest debut at Hawkcon 2024 in Mount Pleasant, Iowa last weekend. She did well as you can see.
From this 1/350 kit any Reliance class WMEC can be built, from 1966 to last month. Waterline and full hull options are included.