STEREGUSHCHIY Project 20380 at 1:72 scale
Moderators: MartinJQuinn, JIM BAUMANN, HMAS, Tiny69, Dave Wooley
-
pacific29
- Posts: 1
- Joined: Wed Jul 11, 2012 2:29 pm
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Hello
Ian french
I search plans Steregushchiy project 20380
Have you plans ?
Thank you
pacific29
Ian french
I search plans Steregushchiy project 20380
Have you plans ?
Thank you
pacific29
- Dave Wooley
- Posts: 4131
- Joined: Sat Jan 22, 2005 10:18 am
- Location: Liverpool
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
At the present time plans for Soobraziltelnyy are only available with the Fleetscale hull .
Dave Wooley
Dave Wooley
- ozpirate
- Posts: 473
- Joined: Fri Jun 16, 2006 3:18 pm
- Location: Tumut, N.S.W. Australia
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Well it�s about time for a new update. Since last times update I had to rebuild the inside of my ship due to the ship being top heavy. Warning people be careful of this.
I made the shield using 0.3 with the pattern being made of fine strips glued on top. Then the whole piece glued on the inside wall.
I then went over the complete superstructure and filed off excess plastic and filled where needed.
Now time to bite the bullet and build the radar above the bridge. Well after a restart I started again and after a few hours of swearing I made something that resembles what I see in pictures.
For those people thinking why I�m slow with this build I�m also working on my Frunze and Admiral Kuznetsov. Yeah I spread myself thin but it doesn�t get boring at least. At least I now have a deck on Frunze and the ship is under RC control and hope sometime in the next few weeks to give it a run. As for the Admiral Kuznetsov , well it�s finally getting some attention and should see an update hmmm� sometime this year�.
I made the shield using 0.3 with the pattern being made of fine strips glued on top. Then the whole piece glued on the inside wall.
I then went over the complete superstructure and filed off excess plastic and filled where needed.
Now time to bite the bullet and build the radar above the bridge. Well after a restart I started again and after a few hours of swearing I made something that resembles what I see in pictures.
For those people thinking why I�m slow with this build I�m also working on my Frunze and Admiral Kuznetsov. Yeah I spread myself thin but it doesn�t get boring at least. At least I now have a deck on Frunze and the ship is under RC control and hope sometime in the next few weeks to give it a run. As for the Admiral Kuznetsov , well it�s finally getting some attention and should see an update hmmm� sometime this year�.
Building
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
- Dave Wooley
- Posts: 4131
- Joined: Sat Jan 22, 2005 10:18 am
- Location: Liverpool
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Hi Mick your build is progressing well . Looking superb .
Dave Wooley

Dave Wooley
- ozpirate
- Posts: 473
- Joined: Fri Jun 16, 2006 3:18 pm
- Location: Tumut, N.S.W. Australia
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Thanks Dave.
How's yours coming along? Do we have a start date yet?
Also any others out there building this type of craft? How are they going?
How's yours coming along? Do we have a start date yet?
Also any others out there building this type of craft? How are they going?
Building
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
- Dave Wooley
- Posts: 4131
- Joined: Sat Jan 22, 2005 10:18 am
- Location: Liverpool
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Hi Mick good to hear from you . As far as I am aware there is no other builds of the Steregushchiy class in progress in the UK . I've been sorting out the PE especially the WT doors which are a departure from the previous Soviet era type . Also the RIB and Power boat for Soobraziltelnyy are different to those on Steregushchiy . Looks like there is going to be a number of the class appearing at events in OZ and I look forward to seeing the models on the water. As mentioned my delay in starting has been the 3 year build of HMS Daring and having plenty of detailed on board shots encouraging greater attention to detail but in reality I'm a slow builder .
Dave Wooley
Dave Wooley
- ozpirate
- Posts: 473
- Joined: Fri Jun 16, 2006 3:18 pm
- Location: Tumut, N.S.W. Australia
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Dave if your a slow builder I don't want to know what I am then!!!
It's been 8 years since I have made a new boat that comes close to touching water. Plenty under construction but none touching water.
It's been 8 years since I have made a new boat that comes close to touching water. Plenty under construction but none touching water.
Building
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
- ozpirate
- Posts: 473
- Joined: Fri Jun 16, 2006 3:18 pm
- Location: Tumut, N.S.W. Australia
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Here is the latest work done for the people looking at my pictures.
Building
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
- ozpirate
- Posts: 473
- Joined: Fri Jun 16, 2006 3:18 pm
- Location: Tumut, N.S.W. Australia
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Almost forgot, I started my Kashtan.
Building
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
- Neptune
- Posts: 2453
- Joined: Sun Mar 13, 2005 11:51 am
- Location: Belgium
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Wow, some pretty awesome work there Mick. All those angles aren't as easy as they look! That mast is a real piece of art. Also the aft mast (if you can call it that) came out pretty sweet!
You're still advancing rather rapidly. Good luck with the Kashtan.

You're still advancing rather rapidly. Good luck with the Kashtan.
The merchant shipyard
- Dave Wooley
- Posts: 4131
- Joined: Sat Jan 22, 2005 10:18 am
- Location: Liverpool
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Hi Mick nice work on the foremast as Neptune has said it is complex and you are doing a great job , press on .
Dave Wooley

Dave Wooley
- ozpirate
- Posts: 473
- Joined: Fri Jun 16, 2006 3:18 pm
- Location: Tumut, N.S.W. Australia
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Thanks guys. I have to give it a rest for now and catch up on some sanding before I go further. Next weekend heading to Sydney for a run with the guys.
Lets hope a better run than last time.
Lets hope a better run than last time.
Building
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
- Neptune
- Posts: 2453
- Joined: Sun Mar 13, 2005 11:51 am
- Location: Belgium
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Since this thread has been officially highjacked, I'll post a cross post from the "Calling All ship fans" part of the board:
For references of all Stereguchiy-and-sisters builders:
For references of all Stereguchiy-and-sisters builders:
Ok, since there is some construction ongoing on Stereguchiy class ships, these links will definately prove useful. Found this site a while back for my own research (not Stere class though). But it's handyfor all kinds of modelling or Russian and non-Russian models. Lots of walk arounds and pictures really taken with the viewpoint of a modeller!
Boikiy
http://www.dishmodels.ru/wshow.htm?p=2699
Soobraztelniy
http://www.dishmodels.ru/wshow.htm?p=2730
And Stereguchiy herself:
From a distance, but sharp close-ups nonetheless:
http://www.dishmodels.ru/wshow.htm?p=1777
From closer-by
http://www.dishmodels.ru/wshow.htm?p=1082
And onboard Stere:
http://www.dishmodels.ru/wshow.htm?p=1122
The merchant shipyard
- Wis
- Posts: 72
- Joined: Fri Nov 23, 2012 4:39 pm
- Contact:
- ozpirate
- Posts: 473
- Joined: Fri Jun 16, 2006 3:18 pm
- Location: Tumut, N.S.W. Australia
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
It's been a while so here are a few pictures.
- Attachments
-
- 20140914-Stergy-0015.jpg (79.69 KiB) Viewed 2159 times
-
- 20140914-Stergy-0018.jpg (74.52 KiB) Viewed 2159 times
-
- 20140914-Stergy-0020.jpg (71.84 KiB) Viewed 2159 times
-
- 20140914-Stergy-0023.jpg (72.46 KiB) Viewed 2159 times
-
- 20140914-Stergy-0031.jpg (68.21 KiB) Viewed 2159 times
Building
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
- Ticonderoga
- Posts: 652
- Joined: Mon Feb 22, 2010 7:54 pm
- Location: Mudgeeraba, Qld Australia
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Good progress Mick, well done.
Andrew

Andrew
Ex RAN. Anzac, Duchess, Vampire, Yarra, Betano, Bombard, Brisbane, Swan, Melbourne (Carrier), HMS Leander
-
adamant
- Posts: 1
- Joined: Sat Sep 20, 2014 12:38 pm
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Hello Mick,
Would you mind sharing larger size pictures of your Stereguschy project on your Google+ account ?
They would be a big help for me building the deck structures.
I am building her in 1:50, and have just put her in the water for the first time
Thanks,
Jos
Would you mind sharing larger size pictures of your Stereguschy project on your Google+ account ?
They would be a big help for me building the deck structures.
I am building her in 1:50, and have just put her in the water for the first time
Thanks,
Jos
- ozpirate
- Posts: 473
- Joined: Fri Jun 16, 2006 3:18 pm
- Location: Tumut, N.S.W. Australia
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Wow scale 1/50 now that's talking a nice size ship. As for larger pictures I am limited to 200kb size images but if there is an image you like email me a private message and I shall be glad to send it direct to you. More images to follow very soon.
Building
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
1/72 Admiral Kuznetsov
1/72 Frunze Russian Battle cruiser
1/72 Steregushchy-class corvette
Mick
Tumut Australia
- Dave Wooley
- Posts: 4131
- Joined: Sat Jan 22, 2005 10:18 am
- Location: Liverpool
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
Hi Mick you are doing a great job .
Dave Wooley
Dave Wooley
- Skipper46
- Posts: 64
- Joined: Sat May 23, 2009 9:19 pm
- Location: Canberra, Australia
Re: STEREGUSHCHIY Project 20380 at 1:72 scale
I asked this question some time ago. Does anyone have a clear pic or description of the Ship Crest for the 20380 project ships esp. BOIKY and STOIKY. I have this crest for Gremyashchy - admittedly a Project 20385 ship and she is not even commissioned yet! 
- Attachments
-
- NF_Gremjaschii.gif (19.52 KiB) Viewed 1832 times
